Sharp MX7090
Simulation mode. List of Classic mode. Codes 65 - 67
| Main | Sub | Functions | Section |
|---|---|---|---|
| 65 | 1 | Used to adjust the touch panel (LCD display section) detection coordinates. | Operation panel section |
| 2 | Used to display the touch panel (LCD display section) detection coordinates. | ||
| 5 | Used to check the operation panel key input. | ||
| 66 | 1 | Used to display the FAX-related soft SW (2 - 150) on the LCD to allow changing the soft SW while checking with the LCD. | FAX |
| 2 | Used to enter a country code and set the default value for the country code. | FAX | |
| 10 | Used to clear the FAX and image send image data. (The confidential data are also cleared.) | FAX | |
| 29 | Used to initialize the telephone book data (the one-touch registration table, the FTP/Desktop expansion table, the group expansion table, the program registration table, the interface memory box table, the meta data, InboundRouting, and the DocumentAdmin table). | FAX | |
| 61 | Used to display the FAX-related soft SW (151 - 250) on the LCD to allow changing the soft SW while checking with the LCD. | FAX | |
| 67 | 17 | Printer reset | Printer |
| 21 | Print output manual adjustment | ||
| 24 | Printer color balance adjustment (Auto adjustment) | Printer | |
| 25 | Printer color balance adjustment (Manual adjustment) | Printer | |
| 26 | Used to set the target color balance of the printer mode auto color balance adjustment. | Printer | |
| 27 | Used to set the service target of the printer mode auto color balance adjustment. | Printer | |
| 28 | Used to set the default of the service target of the printer mode auto color balance adjustment. | Printer | |
| 31 | Used to clear the printer calibration value. | Printer | |
| 33 | Used to change the gamma of the printer screen. | Printer | |
| 34 | Used to set the density correction in the printer high density section. (Support for the high density section tone gap) |
Printer | |
| 36 | Used to adjust the density in the low density section. | Printer | |
| 41 | Used to set the threshold for judging the selected color printing or the black color printing in the black and white mode. | Printer | |
| 42 | Used to adjust the gradation by increasing /decreasing the selected color componet amount or the black color component amount in the black and white mode. | Printer | |
| 43 | 2 Color mode balance adjustment | Printer | |
| 46 | Used to adjust print image enhancement | ||
| 52 | Used to set the default of the gamma of the printer screen. | Printer | |
| 54 | Printer color balance adjustment (Automatic adjustment for each dither) | Printer |