Sharp MX7090
Simulation mode. List of Classic mode. Codes 44 - 50
| Main | Sub | Functions | Section |
|---|---|---|---|
| 44 | 6 | Used to execute the high density process control forcibly. | Process |
| 9 | Used to display the result data of the high density process control operation. | Image process (Photoconductor/ Developing/Transfer/Cleaning) | |
| 12 | Used to display the operation data of the high density process control and the image density sensor (registration sensor). | Image process (Photoconductor/ Developing) | |
| 14 | Used to display the output level of the temperature and humidity sensor. | Process (OPC drum, development)/ Fusing/LSU | |
| 15 | Used to set the OPC drum idle rotation. | Process | |
| 17 | Process refresh execution | Process | |
| 21 | Used to set the halftone process control target. | Process | |
| 22 | Used to display the toner patch density level in the halftone process control operation. | Process | |
| 24 | Used to display the correction target and the correction level in the halftone process control operation. | Process | |
| 25 | Used to set the calculating conditions of the correction value for the halftone process control. | Process | |
| 26 | Used to execute the halftone process control compulsory. | Process | |
| 27 | Used to clear the correction data of the halftone process control. | Process | |
| 28 | Used to set the process control execution conditions. | Process | |
| 29 | Used to set the operating conditions of the process control during a job. | Process | |
| 31 | Used to check the deflection of the OPC drum. | Process | |
| 32 | Used to perform the bias modulation execution. | ||
| 37 | Used to set the development bias correction level in the continuous printing operation. | ||
| 43 | Used to display the identification information of the developing unit. | Developing system | |
| 62 | Used to set the process control execution conditions. | Process | |
| 46 | 1 | Used to adjust the copy density in the copy mode. | |
| 2 | Used to adjust the copy density in the copy mode. | ||
| 4 | Used to adjust the density in the image send mode. | ||
| 5 | Used to adjust the density in the image send mode. | ||
| 8 | Used to adjust the image send mode color balance RGB. | ||
| 9 | Used to adjust the scan image density. | ||
| 10 | Used to adjust the copy color balance and the gamma (for each color copy mode). | ||
| 16 | Used to adjust the monochrome copy density and the gamma (for each monochrome copy mode). | ||
| 19 | Used to set the operating conditions for the density scanning (exposure) of monochrome auto copy mode documents. | ||
| 21 | Copy color balance adjustment (Manual adjustment) | ||
| 23 | Used to set the density correction of copy high density section (High density tone gap supported). | ||
| 24 | Copy color balance adjustment (Auto adjustment) | ||
| 25 | Used to adjust the copy color balance. (Single color copy mode) | ||
| 26 | Used to reset the single color mode color balance set value to the default. | ||
| 27 | Used to adjust the gamma/density of copy images, texts, and line image edges. | ||
| 30 | Used to adjust the resolution in the sub scanning direction in the copy mode. | ||
| 32 | Used to adjust the document background density reproducibility in the monochrome auto copy mode. | ||
| 36 | Used to adjust the colors in the 2-color copy mode. | ||
| 37 | Used to adjust the reproduction capability of monochrome mode color. | ||
| 38 | Used to adjust the black component amount in the color copy mode. | ||
| 47 | Used to set the compression rate of copy and scan images (JPEG). | ||
| 48 | Used to set the copy output resolution. | ||
| 51 | Used to adjust the gamma for the copy mode heavy paper mode and the image process mode. | ||
| 52 | Used to set the gamma default for the copy mode heavy paper and the image process mode. (After execution of either SIM46-54 or SIM46-51, the adjustment value is reset to the initial value.) |
||
| 54 | Used to perform the engine halftone automatic density adjustment (dither). | ||
| 55 | Used to adjust the drop out color in the image send mode (monochrome manual text mode). | ||
| 58 | Used to set the copy mode pseudo resolution. (Smoothing process) | ||
| 60 | Used to adjust the sharpness in the color auto copy mode. | ||
| 61 | Used to adjust the area separation recognition level. | ||
| 62 | Used to set the operating conditions of the ACS, the area separation, the background image process, and the auto exposure mode. | ||
| 63 | Used to adjust the density in the copy low density section. | ||
| 65 | Used to set the color correction table. | ||
| 66 | Used to adjust the reproduction capability of watermarks in the copy/printer mode. | ||
| 68 | Used to adjust the auto resolution judgment. | ||
| 74 | Copy color balance adjustment (Auto adjustment)/Printer color balance adjustment (Auto adjustment) | ||
| 90 | Used to set the process operation of high-compression PDF images. | ||
| 91 | Used to adjust the reproduction capability of black text. | ||
| 48 | 1 | Used to adjust the scan image magnification ratio (in the main scanning direction and the sub scanning direction). | |
| 5 | Used to correction the scan image magnification ratio (in the sub scanning direction). | Scanner section | |
| 6 | Used to adjust the rotation speed of each motor. | ||
| 49 | 1 | Used to perform the firmware update. | |
| 3 | Used to update the operation manual in the HDD. | ||
| 5 | Used to perform the watermark update. | ||
| 6 | Used to perform the OCR update. | ||
| 10 | Used to perform the ACU update. | ||
| 50 | 1 | Copy image position, image loss adjustment |