Sharp MX6500N
Simulation mode. List of simulation codes 53 - 67
| Main | Sub | Functions | Section |
|---|---|---|---|
| 53 | 6 | Used to adjust the detection level of the DSPF document width. | |
| 7 | Used to adjust the DSPF document size width sensor. | ||
| 8 | Used to adjust the document lead edge reference and the DSPF mode document scan position. | ||
| 9 | DSPF dirt detection setting. | ||
| 10 | DSPF dirt detection execution. | ||
| 55 | 1 | Used to set the specifications of the engine control operations. (SOFT SW) | |
| 2 | Used to set the specifications of the scanner control operation. (SOFT SW) | ||
| 3 | Used to set the specifications of the controller operation. (SOFT SW) | ||
| 10 | Used to set the special stamp text. (Taiwan only) | ||
| 56 | 1 | Used to transport data between HDD - MFP PWB SRAM/EEPROM. (Used to repair the PWB.) | |
| 2 | Used to backup the data in the EEPROM. SD Card, and HDD (including user authentication data and address data) to the USB memory. (Corresponding to the device cloning and the storage backup.) | ||
| 3 | Used to backup the document filing data to the USB memory. | ||
| 4 | Used to backup the JOB log data to the USB memory. | ||
| 5 | Used to import the SIM22-6 data to a USB memory in the TEXT format. | ||
| 6 | Used to output the JAM/trouble data. | ||
| 7 | Used to backup the system log. | ||
| 60 | 1 | Used to check the memory operations (read/write) of the MFP PWB. | |
| 61 | 1 | Used to check the LSU polygon motor rotation and laser detection. | LSU |
| 2 | Used to set the laser power (for FIERY) | ||
| 3 | Used to set the laser power | ||
| 4 | Used to print the print image skew adjustment pattern. (LSU unit) | ||
| 11 | Used to correct the laser power automatically. | ||
| 12 | Laser power manual correction | LSU | |
| 13 | Used to clear the laser power correction value. | ||
| 62 | 1 | Used to format the hard disk/SD Card. (HDD: Excluding the Operation manual and the watermark data) (SD Card: User data) | |
| 2 | Used to check read/write of the hard disk (partial). | ||
| 3 | Used to check read/write of the hard disk (all areas). | ||
| 6 | Used to perform the self diagnostics of the hard disk. | ||
| 7 | Used to print the hard disk self diagnostics error log. | ||
| 8 | Used to format the hard disk/SD Card. (HDD: Excluding the Operation Manual, the watermark data, and the system area) (SD Card: User data) | ||
| 10 | Used to clear the job completion list data. | ||
| 11 | Used to delete the document filing data. | ||
| 12 | Used to set Enable/Disable of auto format in a hard disk trouble. | ||
| 13 | Used to format the hard disk. (Operation Manual, watermark data only) | ||
| 14 | Used to delete the document filing management data. | HDD | |
| 20 | Used to check the operation of the mirroring hard disk. | Mirroring hard disk | |
| 63 | 1 | Used to display the shading correction result. | Scanner |
| 2 | Used to perform shading. | ||
| 3 | Used to perform scanner (CCD) color balance and gamma auto adjustment. | Scanner | |
| 4 | Used to display the SIT chart patch density. | ||
| 5 | Used to perform the scanner (CCD) color balance and gamma default setting. | ||
| 6 | Used to display the scan level and the density level of the copy color balance adjustment patch. | ||
| 7 | Used to register the service target of the copy mode auto color balance adjustment. | ||
| 8 | Used to set the default of the service target of the copy mode auto color balance adjustment. | ||
| 11 | Used to set the target color balance of the copy mode auto color balance adjustment. | ||
| 64 | 1 | Test print. (Self print) (Color mode) | |
| 2 | Test print. (Self print) (Monochrome mode) | ||
| 4 | Printer test print. (Self print) | ||
| 5 | Printer test print. (Self print) (PCL) | ||
| 6 | Printer test print. (Self print) (PS) | ||
| 7 | Used to print the adjustment pattern of the test print. (Self print). (The adjustment pattern of SIM46-21 is printed.) | ||
| 65 | 1 | Used to adjust the touch panel (LCD display section) detection coordinates. | Operation panel section |
| 2 | Used to display the touch panel (LCD display section) detection coordinates. | ||
| 5 | Used to check the operation panel key input. | ||
| 67 | 17 | Printer reset | Printer |
| 24 | Printer color balance adjustment (Auto adjustment) | Printer | |
| 25 | Printer color balance adjustment (Manual adjustment) | Printer | |
| 26 | Used to set the target color balance of the printer mode auto color balance adjustment. | Printer | |
| 27 | Used to set the service target of the printer mode auto color balance adjustment. | Printer | |
| 28 | Used to set the default of the service target of the printer mode auto color balance adjustment. | Printer | |
| 31 | Used to clear the printer calibration value. | Printer | |
| 33 | Used to change the gamma of the printer screen. | Printer | |
| 34 | Used to set the density correction in the printer high density section. (Support for the high density section tone gap) |
Printer | |
| 36 | Used to adjust the density in the low density section. | Printer | |
| 45 | Used to adjust the printer image filter and trapping. | ||
| 52 | Used to set the default of the gamma of the printer screen. | Printer | |
| 54 | Printer color balance adjustment (Automatic adjustment for each dither) | Printer |