| Main |
Sub |
Functions |
Section |
| 46 |
1 |
Used to adjust the copy density in the copy mode. |
|
| 2 |
Used to adjust the copy density in the copy mode. |
|
| 4 |
Used to adjust the density in the image send mode. |
|
| 5 |
Used to adjust the density in the image send mode. |
|
| 8 |
Used to adjust the image send mode color balance RGB. |
|
| 9 |
Used to adjust the scan image density. |
|
| 10 |
Used to adjust the copy color balance and the gamma (for each color copy mode). |
|
| 16 |
Used to adjust the monochrome copy density and the gamma (for each monochrome copy mode). |
|
| 19 |
Used to set the operating conditions for the density scanning (exposure) of monochrome auto copy mode documents. |
|
| 21 |
Copy color balance adjustment (Manual adjustment) |
|
| 23 |
Used to set the density correction of copy high density section (High density tone gap supported). |
|
| 24 |
Copy color balance adjustment (Auto adjustment) |
|
| 25 |
Used to adjust the copy color balance. (Single color copy mode) |
|
| 26 |
Used to reset the single color mode color balance set value to the default. |
|
| 27 |
Used to adjust the gamma/density of copy images, texts, and line image edges. |
|
| 30 |
Used to adjust the resolution in the sub scanning direction in the copy mode. |
|
| 32 |
Used to adjust the document background density reproducibility in the monochrome auto copy mode. |
|
| 36 |
Used to adjust the colors in the 2-color copy mode. |
|
| 37 |
Used to adjust the reproduction capability of monochrome mode color. |
|
| 38 |
Used to adjust the black component amount in the color copy mode. |
|
| 39 |
Used to adjust the sharpness of FAX send images. |
|
| 40 |
Used to adjust the FAX send image density. (Collective adjustment of all the modes) |
|
| 41 |
Used to adjust the FAX send image density. (Normal) |
|
| 42 |
Used to adjust the FAX send image density. (Fine) |
|
| 43 |
Used to adjust the FAX send image density. (Super Fine) |
|
| 44 |
Used to adjust the FAX send image density. (Ultra fine) |
|
| 45 |
Used to adjust the FAX send image density. (600dpi). |
|
| 46 |
Used to adjust the FAX send image density. (RGB RIP) |
|
| 47 |
Used to set the compression rate of copy and scan images (JPEG). |
|
| 51 |
Used to adjust the gamma for the copy mode heavy paper mode and the image process mode. |
|
| 52 |
Used to set the gamma default for the copy mode heavy paper and the image process mode. (After execution of either SIM46-54 or SIM46-51, the adjustment value is reset to the initial value.) |
|
| 54 |
Used to perform the engine halftone automatic density adjustment (dither). |
|
| 55 |
Used to adjust the drop out color in the image send mode (monochrome manual text mode). |
|
| 58 |
Used to set the copy mode pseudo resolution. (Smoothing process) |
|
| 59 |
Used to perform the copy mode pseudo resolution image process adjustment. |
|
| 60 |
Used to adjust the sharpness in the color auto copy mode. |
|
| 61 |
Used to adjust the area separation recognition level. |
|
| 62 |
Used to set the operating conditions of the ACS, the area separation, the background image process, and the auto exposure mode. |
|
| 63 |
Used to adjust the density in the copy low density section. |
|
| 65 |
Used to set the color correction table. |
|
| 66 |
Used to adjust the reproduction capability of watermarks in the copy/printer mode. |
|
| 74 |
Copy color balance adjustment (Auto adjustment)/Printer color balance adjustment (Auto adjustment) |
|
| 90 |
Used to set the process operation of high-compression PDF images. |
|
| 91 |
Used to adjust the reproduction capability of black text. |
|
| 48 |
1 |
Used to adjust the scan image magnification ratio (in the main scanning direction and the sub scanning direction). |
|
| 5 |
Used to correction the scan image magnification ratio (in the sub scanning direction). |
Scanner section |
| 6 |
Used to adjust the rotation speed of each motor. |
|
| 49 |
1 |
Used to perform the firmware update. |
|
| 3 |
Used to update the operation manual in the HDD. |
|
| 5 |
Used to perform the watermark update. |
|
| 10 |
ACU Firmware upgrade. |
|
| 50 |
1 |
Copy image position, image loss adjustment |
|
| 5 |
Used to adjust the print lead edge image position. (PRINTER MODE) |
|
| 6 |
Used to adjust the copy image position and the image loss. (DSPF/RSPF mode) |
DSPF/RSPF |
| 10 |
Used to adjust the black print image magnification ratio and the off-center position. (The adjustment is made separately for each paper feed section.) |
|
| 12 |
Used to perform the scan image off-center position adjustment. (The adjustment is made separately for each scan mode.) |
|
| 20 |
Image registration adjustment (Main scanning direction) |
|
| 22 |
Used to adjust the image registration. (Main scan direction, sub scan direction) (Auto adjustment)/OPC drum phase adjustment (Auto adjustment) |
|
| 24 |
Used to display the detail data of SIM 44-2, 50-20, 21 and 22. |
|
| 27 |
Used to perform the image loss adjustment of scanned images in the FAX or image send mode. |
|
| 28 |
Used to automatically adjust the image loss, void area, image off-center, and image magnification ratio. |
|
| 51 |
1 |
Used to adjust the ON/OFF timing of the secondary transport voltage. |
|
| 2 |
Used to adjust the contact pressure (deflection amount) on paper by the main unit and the DSPF/RSPF registration roller. (This adjustment is performed when there is a considerable variation in the print image position on the paper or when paper jams frequently occur.) |
|