Sharp MX5051
Simulation mode. List of Classic mode. Codes 26 - 44
| Main | Sub | Functions | Section |
|---|---|---|---|
| 26 | 32 | Used to set the specifications of the fusing cleaning operation. | Fusing |
| 33 | Special function setting | ||
| 35 | Used to set the display mode of SIM 22-4 trouble history when a same trouble occurred repeatedly. There are two display modes: display as one trouble and display as several series of troubles. |
||
| 38 | Used to set Continue/Stop of print when the maintenance life is reached. | ||
| 41 | Used to set Enable/Disable of the magnification ratio automatic select function (AMS) in the center binding mode. | ||
| 49 | Used to set the print speed of postcards mode. | ||
| 50 | Used to set functions. | ||
| 52 | Used to set whether non-printed paper (insertion paper, cover paper) is counted up or not. | ||
| 65 | Used to set the finisher alarm mode. | ||
| 66 | Simulation password setting. | ||
| 69 | Used to set the operating conditions for toner near end. | ||
| 73 | Enlargement continuous shoot, A3 wide copy mode image loss (shade delete quantity) adjustment | ||
| 74 | Used to set the OSA trial mode. | ||
| 78 | Used to set the password of the remote operation panel. | ||
| 79 | Used to set YES/NO of the pop-up display of user data delete result. | ||
| 85 | Simulation function setting. | ||
| 27 | 2 | Used to set the sender's registration number and the HOST server telephone number. (FSS function) | |
| 4 | Used to set the initial call and toner order auto send. (FSS function) | ||
| 5 | Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) (FSS function) | Communication (RIC/MODEM) | |
| 6 | Used to set of the manual service call. (FSS function) | ||
| 7 | Used to set of the enable, alert callout. (FSS function) | ||
| 9 | Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) | ||
| 10 | Used to clear the trouble prediction history information. (FSS function) | ||
| 11 | Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) | ||
| 12 | Used to check the high density, halftone process control and the automatic registration adjustment error history. (FSS Function) | ||
| 13 | Used to check the history of paper transport time between sensors. (FSS function) | ||
| 14 | Used to set the FSS function connection test mode. | ||
| 15 | Used to display the FSS connection status. | ||
| 16 | Used to set the FSS alert send. | ||
| 17 | Used to set the FSS paper order alert. | ||
| 30 | 1 | Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. | |
| 2 | Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. | ||
| 40 | 2 | Manual paper feed tray paper width sensor adjustment. | Paper feed |
| 7 | Used to set the adjustment value of the manual paper feed tray paper width sensor. | Paper feed | |
| 12 | Used to adjust the tray 4 width detection level. | Paper feed | |
| 41 | 1 | Used to check the operations of the document size sensor and the control circuit. | |
| 2 | Used to adjust the document size sensor detection level. | ||
| 3 | Used to check the operations of the document size sensor and the control circuit. | ||
| 43 | 1 | Used to set the fusing temperature in each mode. | |
| 2 | Used to set the fusing operation and preheating. | ||
| 20 | Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-2) in each paper mode. | ||
| 21 | Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-2) in each paper mode. | ||
| 24 | Used to set the fusing operation mode | ||
| 31 | Used to check fusing web cleaning. | ||
| 32 | Used to set various items related to the forcible operation of web cleaning when job end. | Fusing | |
| 35 | Fusing nip operation check | Fusing | |
| 50 | Fusing Cleaning Mode | ||
| 44 | 1 | Used to set each correction operation function in the image forming (process) section. | Image process (Photoconductor/ Developing/Transfer/Cleaning) |
| 2 | Used to adjust the sensitivity of the image density sensor (registration sensor). | Process | |
| 4 | Used to set the conditions of the high density process control operation. | Process | |
| 6 | Used to execute the high density process control forcibly. | Process | |
| 9 | Used to display the result data of the high density process control operation. | Image process (Photoconductor/ Developing/Transfer/Cleaning) | |
| 12 | Used to display the operation data of the high density process control and the image density sensor (registration | Image process (Photoconductor/ | |
| sensor). | Developing) | ||
| 14 | Used to display the output level of the temperature and humidity sensor. | Process (OPC drum, development)/ Fusing/LSU | |
| 15 | Used to set the OPC drum idle rotation. | Process | |
| 17 | Process refresh execution | Process | |
| 21 | Used to set the halftone process control target. | Process | |
| 22 | Used to display the toner patch density level in the halftone process control operation. | Process | |
| 24 | Used to display the correction target and the correction level in the halftone process control operation. | Process |