Sharp MX5050N
Simulation mode. List of Classic mode. Codes 61 - 66
Sim No. | Easy Mode | ||||
---|---|---|---|---|---|
Installation | Maintenance | Adjustment and Settings | |||
61 | 11 | Used to correct the laser power | 2-3 | 1-2 | |
automatically | -3 | ||||
12 | Laser power manual correction | ||||
13 | Used to clear the laser power correction value | 2-3 | 1-3 | ||
14 | Used to set the laser power correction | 1-3 | |||
62 | 1 | Used to format the HDD | |||
2 | Used to check read/write of the HDD (partial) | ||||
3 | Used to check read/write of the HDD (all areas) | ||||
6 | Used to perform the self diagnostics of the HDD | ||||
7 | Used to print the HDD self diagnostics error log | ||||
8 | Used to format the HDD | ||||
10 | Used to clear the job completion list data | ||||
11 | Used to delete the document filing data | ||||
12 | Used to set Enable/Disable of auto format in a HDD trouble |
||||
13 | Used to format the HDD (Operation manual watermark data only) | ||||
14 | Used to delete the document filing management data | ||||
20 | Used to check the status display of HDD | ||||
63 | 1 | Used to display the shading correction result | |||
2 | Used to perform shading | 1-5 | 3 | ||
3 | Used to perform scanner (CCD) color balance and gamma auto adjustment | 1-5 | 2-3 | 3 | |
4 | Used to display the scanner test chart patch density | ||||
5 | Used to perform the scanner (CCD) color balance and gamma default setting | 2-3 | 3 | ||
7 | Used to register the service target of the copy mode auto color balance adjustment | 5 | |||
8 | Used to set the default of the service target of the copy mode auto color balance adjustment | 5 | |||
11 | Used to set the target color balance of the copy mode auto color balance adjustment | 5 | |||
64 | 1 | Test print (self print) (color mode) | |||
2 | Test print (self print) (monochrome mode) | 8 | |||
4 | Printer test print (self print) | ||||
5 | Printer test print (self print) (PCL) | 1-4 | |||
6 | Printer test print (self print) (PS) | ||||
65 | 1 | Used to adjust the touch panel (LCD display section) detection coodinates | 7 | ||
2 | Used to display the touch panel (LCD display section) detection coodinates | ||||
5 | Used to check the operation panel key input | ||||
66 | 1 | Used to display the image send-related soft SW (2-150) on the LCD to allow changing the soft SW while checking with the LCD | 2-3 | ||
2 | Used to enter a country code and set the default value for the country code | ||||
3 | Used to check read/write of the EEPROM and the SDRAM on the MODEM controller and display the result |
||||
4 | Used to send the selected signals to the line and the main unit speaker (send level: max) | ||||
5 | Used to send the selected signal to the line and the main unit speaker (send level: soft SW setting) | ||||
6 | Used to print the confidential registration check table (BOX No, BOX name, passcode |