Sharp MX5050N
Simulation mode. List of Classic mode. Codes 50 - 61
| Sim No. | Easy Mode | ||||
|---|---|---|---|---|---|
| Installation | Maintenance | Adjustment and Settings | |||
| 50 | 1 | Copy image position, image loss adjustment | 1-1 | ||
| 5 | Used to adjust the print lead edge image position | 1-1 | |||
| 6 | Used to adjust the copy image position and the image loss (SPF mode) | 1-1 | |||
| 10 | Used to adjust print image position | 1-2 | 2-1 | 1-1 | |
| 12 | Used to perform the scan image off center position adjustment | 1-1 | |||
| 20 | Image registration adjustment (Main scanning direction) | 1-2 | |||
| 22 | Used to adjust the image registration (Main | 1-1 | 2-1 | 1-1 | |
| scan direction, sub scan direction) | -2 | ||||
| 23 | Used to set the registration for temperature adjustment | ||||
| 24 | Used to display the detail data of SIM 44-2, 50-22 | ||||
| 27 | Used to perform the image loss adjustment of scanned images in the FAX or image send mode | ||||
| 28 | Used to automatically adjust the image loss, void area, image off center and image magnification ratio | 1-1 | |||
| 51 | 1 | Used to adjust the ON/OFF timing of the secondary transport voltage | |||
| 2 | Used to adjust the contact pressure (deflection amount) on paper by the main unit and the SPF resist roller | ||||
| 53 | 6 | Used to adjust the detection level of the SPF document width |
3 | ||
| 7 | Used to adjust the SPF document size width sensor | ||||
| 8 | Used to adjust the document lead edge reference and the SPF mode document scan position | 3 | |||
| 9 | SPF dirt detection setting | ||||
| 10 | SPF dirt detection execution | ||||
| 55 | 1 | Used to set the specification of the engine control operations (SOFT SW) | |||
| 2 | Used to set the specifications of the scanner control operation (SOFT SW) | ||||
| 3 | Used to set the specifications of the controller operation (SOFT SW) | ||||
| 10 | Used to set the special stamp text for Taiwan |
||||
| 56 | 1 | Used to transport data between HDD - MFP PWB SRAM/EEPROM | |||
| 2 | Used to backup the data in the EEPROM and HDD to the USB memory | ||||
| 3 | Used to backup the document filing data to the USB memory | ||||
| 4 | Used to backup the JOB log data to the USB memory |
||||
| 5 | Used to import the SIM22-6 data to a USB memory in the text format | ||||
| 6 | Used to output the JAM/trouble data | ||||
| 7 | Used to export system log data to the USB memory | ||||
| 8 | Used to perform ICC profile update | ||||
| 99 | Used to export system log data to the USB memory | 3-4 | 1-5 | 9-4 | |
| 60 | 1 | Used to check the memory operations (read/write) of the SCU-MFP PWB | |||
| 61 | 1 | Used to check the LSU polygon motor rotation and laser detection | |||
| 3 | Used to set the laser power | ||||
| 4 | Used to print the print image skew adjustment pattern | ||||