Sim No. |
|
Easy Mode |
Installation |
Maintenance |
Adjustment and Settings |
44 |
22 |
Used to display the toner patch density level in the halftone process control operation |
|
|
|
24 |
Used to display the correction target and the correction level in the halftone process control operation |
|
|
|
25 |
Used to set the calculating conditions of the correction value for the halftone process control |
|
|
|
26 |
Used to execute the halftone process control compulsory |
1-5 |
2-3 |
|
27 |
Used to clear the correction data of the halftone process control |
|
|
|
28 |
Used to set the process control execution conditions |
|
|
|
29 |
Used to set the operating conditions of the process control during a job |
|
|
|
31 |
Used to adjust the OPC drum phase (Manual adjustment) |
|
|
|
37 |
Used to set the development bias correction level in the continuous printing operation |
|
|
|
43 |
Used to display the identification information of the developing unit |
|
|
|
62 |
Used to set the process control execution conditions |
|
|
|
46 |
1 |
Used to adjust the copy density in the copy mode |
|
|
|
2 |
Used to adjust the copy density in the copy mode |
|
|
|
4 |
Used to adjust the density in the image send mode |
|
|
|
5 |
Used to adjust the density in the image send mode |
|
|
|
8 |
Used to adjust the image send mode color balance RGB |
|
|
|
9 |
Used to adjust the scan image density |
|
|
3 |
10 |
Used to adjust the copy color balance and the gamma (for each color copy mode) |
|
|
|
16 |
Used to adjust the monochrome copy density and the gamma |
|
|
|
19 |
Used to set the operating conditions for the density scanning (exposure) of monochrome auto copy mode documents |
|
|
|
21 |
Copy color balance adjustment (manual adjustment) |
1-3 |
|
5 |
23 |
Used to set the density correction of copy high density section (high density tone gap supported) |
|
|
|
24 |
Copy color balance adjustment (auto adjustment) |
|
|
5 |
25 |
Used to adjust the copy color balance (single color copy mode) |
|
|
|
26 |
Used to reset the single color mode color balance set value to the default |
|
|
|
27 |
Used to adjust the gamma/density of copy images, text and line image edges |
|
|
|
30 |
Used to adjust the resolution in the sub scanning direction in the copy mode |
|
|
|
32 |
Used to adjust the document background density reproducibility in the monochrome auto copy mode |
|
|
|
36 |
Used to adjust the colors in the two color copy mode |
|
|
|
37 |
Used to adjust the reproduction capability of monochrome mode color |
|
|
|
38 |
Used to adjust the black component amount in the color copy mode |
|
|
|