Sharp MX4141FN
Simulation mode. List of codes 27-44
Main | Sub | Functions | Section |
---|---|---|---|
27 | 1 | Used to set non-detection of communication error (U7-00) with RIC. (FSS function) | |
2 | Used to set the sender's registration number and the HOST server telephone number. (FSS function) | ||
4 | Used to set the initial call and toner order auto send. (FSS function) | ||
5 | Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) (FSS function) | Communication (RIC/MODEM) | |
6 | Used to set of the manual service call. (FSS function) | ||
7 | Used to set of the enable, alert call out. (FSS function) | ||
9 | Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) | ||
10 | Used to clear the trouble prediction history information. (FSS function) | ||
11 | Used to check the serial communication retry number and the scanner gain adjustment retry number history. (FSS function) | ||
12 | Used to check the high density, halftone process control and the automatic registration adjustment error history. (FSS Function) | ||
13 | Used to check the history of paper transport time between sensors. (FSS function) | ||
14 | Used to set the FSS function connection test mode. | ||
15 | Used to display the FSS connection status. | ||
16 | Used to set the FSS alert send. | ||
17 | Used to set the FSS paper order alert. | ||
18 | Used to clear the FSS paper feed retry counter. | ||
30 | 1 | Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. | |
2 | Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. | ||
40 | 2 | Manual paper feed tray paper width sensor adjustment. | Paper feed |
7 | Used to set the adjustment value of the manual paper feed tray paper width sensor. | Paper feed | |
41 | 1 | Used to check the operations of the document size sensor and the control circuit. | |
2 | Used to adjust the document size sensor detection level. | ||
3 | Used to check the operations of the document size sensor and the control circuit. | ||
43 | 1 | Used to set the fusing temperature in each mode. | |
2 | Used to set the fusing operation and preheating. | ||
20 | Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-1) in each paper mode. | ||
21 | Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. | ||
24 | Operation setting 2 | ||
31 | Used to check the operation of the fusing web cleaning. | Fusing | |
32 | Used to set various items related to the forcible operation of web cleaning when job end. | Fusing | |
35 | Fusing nip operation check. | Fusing | |
44 | 1 | Used to set each correction operation function in the image forming (process) section. | Image process (Photoconductor/ Developing/Transfer/Cleaning) |
2 | Used to adjust the sensitivity of the image density sensor (registration sensor). | Process | |
4 | Used to set the conditions of the high density process control operation. | Process | |
6 | Used to execute the high density process control forcibly. | Process | |
9 | Used to display the result data of the high density process control operation. | Image process (Photoconductor/ Developing/Transfer/Cleaning) | |
12 | Used to display the operation data of the high density process control and the image density sensor (registration sensor). | Image process (Photoconductor/ Developing) | |
14 | Used to display the output level of the temperature and humidity sensor. | Process (OPC drum, development)/ Fusing/LSU | |
15 | Used to set the OPC drum idle rotation. | Process | |
17 | Process refresh execution. | Process | |
21 | Used to set the halftone process control target. | Process | |
22 | Used to display the toner patch density level in the halftone process control operation. | Process | |
24 | Used to display the correction target and the correction level in the halftone process control operation. | Process | |
25 | Used to set the calculating conditions of the correction value for the halftone process control. | Process | |
26 | Used to execute the halftone process control compulsory. | Process | |
27 | Used to clear the correction data of the halftone process control. | Process | |
28 | Used to set the process control execution conditions. | Process | |
29 | Used to set the operating conditions of the process control during a job. | Process | |
31 | Used to adjust the OPC drum phase. (Manual adjustment) | Process | |
37 | Used to set the development bias correction level in the continuous printing operation. | ||
43 | Used to display the identification information of the developing unit. | Developing system | |
61 | Used to adjust the color image density sensor. (The adjustment is made according to the input of SIM44- 13 to set the target value of the color sensor gain adjustment.) | ||
62 | Used to set the process control execution conditions. | Process |