Sharp MX4061
Simulation mode. List of Classic mode. Codes 61-11 - 66-11
| Sim No. | Function | Easy Mode | ||
|---|---|---|---|---|
| Installation | Maintenance | Adjustment and Settings | ||
| 61-11 | Adjust the laser power (Auto) | 2-3 | 1-2 1-3 |
|
| 61-12 | Adjust the Laser power (Manual) | |||
| 61-13 | Clear the laser power correction value | 2-3 | 1-3 | |
| 61-14 | Set the laser power correction value | 1-3 | ||
| 62-1 | Format the storage | |||
| 62-3 | Check read/write of the STORAGE (all areas) | |||
| 62-4 | Check the format of the STORAGE (Logical) | |||
| 62-7 | Print the self diagnostics error log of the STORAGE | |||
| 62-9 | Clear the data in the STORAGE | |||
| 62-12 | Set auto format in STORAGE error | |||
| 62-14 | Check/Delete the database file in the STORAGE | |||
| 62-21 | Display the storage information in the STORAGE | |||
| 63-1 | Display the shading correction result | |||
| 63-2 | Execute shading correction | 1-5 | 3 | |
| 63-3 | Adjust scanner (CCD) color balance and gamma | 1-5 | 2-3 | 3 |
| 63-4 | Display the scanner test chart patch density | |||
| 63-5 | Set the default of the scanner (CCD) color balance and gamma | 2-3 | 3 | |
| 63-7 | Set the service target of the copy mode auto color balance adjustment | 5 | ||
| 63-8 | Set the default of the service target of the copy mode auto color balance adjustment | 5 | ||
| 63-11 | Set the target color balance of the copy mode auto color balance adjustment | 5 | ||
| 64-1 | Print test pattern (self print) (color mode) | |||
| 64-2 | Print test pattern (self print) (monochrome mode) | 8 | ||
| 64-4 | Print printer test pattern (self print) | |||
| 64-5 | Print printer test pattern (self print) (PCL) | 1-4 | ||
| 64-6 | Print printer test pattern (self print) (PS) | |||
| 65-1 | Adjust the touch panel (LCD display section) detection coordinates | 7 | ||
| 65-2 | Display the touch panel (LCD display section) detection coordinates | |||
| 65-5 | Check the operation panel key input | |||
| 66-1 | Set the FAX related soft SW (2-150) | 2-3 | ||
| 66-2 | Set a country code and the default for the country code | |||
| 66-3 | Check read/write of the EEPROM and the SDRAM on the MODEM controller and display the result |
|||
| 66-4 | Check the transmission of the selected signal to the line and the main unit speaker (transmission level: max) | |||
| 66-5 | Check the transmission of the selected signal to the line and the main unit speaker (transmission level: soft SW setting) | |||
| 66-6 | Print the confidential registration check table (BOX No, BOX name, passcode) | |||
| 66-7 | Print the all image data saved in the image memory | |||
| 66-8 | Check the transmission of the selected sound message to the line and the main unit speaker (transmission level: max) | |||
| 66-9 | Check the transmission of the selected sound message to the line and the main unit speaker (transmission level: soft SW setting) | |||
| 66-10 | Clear the FAX and image send image data | |||
| 66-11 | Check the transmission of the selected signal at 300bps to the line and the main unit speaker (transmission level: max) | |||