Sharp MX4061
Simulation mode. List of Classic mode. Codes 22-3 - 26-33
| Sim No. | Function | Installation | Maintenance | Adjustment and Settings |
|---|---|---|---|---|
| 22-3 | Check misfeed positions and the misfeed count of each position | 1-2 | ||
| 22-4 | Check trouble (self diag) history | |||
| 22-5 | Check ROM version of each unit | 3-2 | 1-3 | 9-2 |
| 22-6 | Output the setting/adjustment data, the firmware version and the count list | 3-3 | 1-4 | 9-3 |
| 22-8 | Check the operation count of the finisher, the SPF and the scan (reading) unit | 1-1 | ||
| 22-9 | Check paper feed count of each paper feed section | 3-1 | 1-1 | 9-1 |
| 22-10 | Check the system configuration (option, internal hardware) | 3-2 | 1-3 | 9-2 |
| 22-11 | Check FAX count | |||
| 22-12 | Check SPF misfeed positions and misfeed count at each position | 1-2 | ||
| 22-13 | Check the operating time of the process section (OPC drum, DV unit, toner cartridge) and the fusing unit) | 3-1 | 1-1 | 9-1 |
| 22-14 | Display toner cartridge usage status count | |||
| 22-18 | Display user data delete history | |||
| 22-19 | Check scan and image send count | |||
| 22-40 | Display trouble code information | |||
| 22-41 | Check JAM code information | |||
| 22-42 | Display JAM/trouble data | |||
| 22-43 | Display JAM data details | |||
| 22-90 | Output system setting list | |||
| 23-2 | Output trouble history list of paper jam and misfeed | 3-3 | 1-4 | 9-3 |
| 23-80 | Check the operation of paper feed and paper transport in the paper feed section and the paper transport section. Output operation status list of the sensor and detectors in the paper feed section and the paper transport section | |||
| 23-81 | Export paper feed time list | |||
| 24-1 | Clear jam count and trouble count | 3 | ||
| 24-2 | Clear paper feed count of each paper feed section | 3 | ||
| 24-3 | Clear the finisher, SPF and the scan (reading) unit count | 3 | ||
| 24-4 | Clear maintenance count and printer count of the transport unit and the fusing unit | 3 | ||
| 24-5 | Clear developer count | |||
| 24-35 | Clear toner cartridge usage status count | |||
| 25-1 | Check the operation of the developing section | |||
| 25-2 | Make the initial setting of toner density when | 1-1 | 2-2 | 2 |
| replacing developer | 2-5 | |||
| 25-4 | Display the operation data of the toner supply quantity | |||
| 25-5 | Display the toner density correction data | |||
| 26-1 | Set paper output tray | 2-1 | ||
| 26-2 | Set the paper size of the large capacity tray (LCC) | 2-1 | ||
| 26-3 | Set the auditor mode | 2-1 | ||
| 26-5 | Set count mode of the total count and the maintenance count |
2-2 | ||
| 26-6 | Set destination area | |||
| 26-7 | Set machine ID | |||
| 26-8 | Set counter mode for long scale | 2-2 | ||
| 26-10 | Set the trial mode of the network scanner | |||
| 26-18 | Set the toner save mode operation | 2-4 | ||
| 26-30 | Set the CE mark operation mode | |||
| 26-32 | Set the specification of the fusing cleaning operation | |||
| 26-33 | Set the special function | 2-1 |