Sim No. |
|
Easy Mode |
Installation |
Maintenance |
Adjustment and Settings |
44-37 |
Used to set the development bias correction level in the continuous printing operation |
|
|
|
44-43 |
Used to display the identification information of the developing unit |
|
|
|
44-62 |
Used to set the process control execution conditions |
|
|
|
46-1 |
Used to adjust the copy density in the copy mode |
|
|
|
46-2 |
Used to adjust the copy density in the copy mode |
|
|
|
46-4 |
Used to adjust the density in the image send mode |
|
|
|
46-5 |
Used to adjust the density in the image send mode |
|
|
|
46-8 |
Used to adjust the image send mode color balance RGB |
|
|
|
46-9 |
Used to adjust the scan image density |
|
|
3 |
46-10 |
Used to adjust the copy color balance and the gamma (for each color copy mode) |
|
|
|
46-16 |
Used to adjust the monochrome copy density and the gamma (for each monochrome copy mode) |
|
|
|
46-19 |
Used to set the operating conditions for the density scanning (exposure) of monochrome auto copy mode documents |
|
|
|
46-21 |
Copy color balance adjustment (manual adjustment) |
1-3 |
|
5 |
46-23 |
Used to set the density correction of copy high density section (high density tone gap supported) |
|
|
|
46-24 |
Copy color balance adjustment (auto adjustment) |
|
|
5 |
46-25 |
Used to adjust the copy color balance (single color copy mode) |
|
|
|
46-26 |
Used to reset the single color mode color balance set value to the default |
|
|
|
46-27 |
Used to adjust the gamma/density of copy images, text and line image edges |
|
|
|
46-30 |
Used to adjust the resolution in the sub scanning direction in the copy mode |
|
|
|
46-32 |
Used to adjust the document background density reproducibility in the monochrome auto copy mode |
|
|
|
46-36 |
Used to adjust the colors in the two color copy mode |
|
|
|
46-37 |
Used to adjust the reproduction capability of monochrome mode color |
|
|
|
46-38 |
Used to adjust the black component amount in the color copy mode |
|
|
|
46-39 |
Used to adjust the sharpness of FAX send images |
|
|
|
46-40 |
Used to adjust the FAX send image density (Collective adjustment of all the modes) |
|
|
|
46-41 |
Used to adjust the FAX send image density (Normal) |
|
|
|
46-42 |
Used to adjust the FAX send image density (Fine) |
|
|
|
46-43 |
Used to adjust the FAX send image density (Super fine) |
|
|
|
46-44 |
Used to adjust the FAX send image density (Ultra fine) |
|
|
|
46-45 |
Used to adjust the FAX send image density (600dpi) |
|
|
|
46-46 |
Used to adjust the FAX send image density (RGB RIP) |
|
|
|
46-47 |
Used to set the compression rate of copy and scan images (JPEG) |
|
|
|
46-48 |
Used to set the copy output resolution of copy mode |
|
|
|