Sharp MX3640N
Simulation mode. List of simulation codes 22 - 27
| Main | Sub | Functions | Section |
|---|---|---|---|
| 22 | 43 | JAM data details display | |
| 60 | Used to check utility counter mode history data display. | ||
| 90 | Used to output the various set data lists. | ||
| 23 | 2 | Used to output the trouble history list of paper jam and misfeed. (If the number oftroubles of misfeed is considerably great, the judgment is made that repair is required.) |
|
| 80 | Used to check the operation of paper feed and paper transport in the paper feed section and the paper transport section. Used to output the list of the operation status ofthe sensor and the detectors in the paper feed section and the paper transport section. | Paper feed, Paper transport | |
| 24 | 1 | Used to clear the jam counter, and the trouble counter. (After completion of maintenance, clear the counters.) |
|
| 2 | Used to clear the number of use (the number of prints) of each paper feed section. | ||
| 3 | Used to clear the finisher, RSPF, and the scan (reading) unit counter. | ||
| 4 | Used to clear the maintenance counter, the printer counters ofthe transport unit and the fusing unit. (After completion of maintenance, clear the counters.) |
||
| 5 | Used to clear the developer counter. (After replacement of developer, clear the counter.) | ||
| 6 | Used to clear the copy counter. | ||
| 9 | Used clear the printer mode print counter and the self print mode print counter. | ||
| 10 | Used to clear the FAX counter. (Only when FAX is installed) | ||
| 12 | Used to clear the document filing counter. | ||
| 15 | Used to clear the counters related to the scan mode and the image send. | ||
| 35 | Used to clear the toner cartridge use status data. | ||
| 60 | Used to clear utility counter mode history data. | ||
| 25 | 1 | Used to checkthe operations ofthe developing section. | Process (Developing section) |
| 2 | Used to make the initial setting of toner density when replacing developer. (Automatic adjustment) | Image process (Photoconductor/ Developing/Transfer/Cleaning) | |
| 4 | Used to display the operation data ofthe toner supply quantity. (Not used in the market.) | Process | |
| 5 | Used to display the toner density correction data. (Not used in the market.) | Process | |
| 26 | 1 | Used to set Yes/No of installation ofthe right paper exit tray. | Paper exit |
| 2 | Used to set the paper size of the large capacity tray (LCC) (When the paper size is changed, this simulation must be executed to change the paper size in software. ) |
Paper exit | |
| 3 | Used to set the specifications ofthe auditor. (Setting must be made according to the auditor use conditions.) |
Auditor | |
| 5 | Used to set the count mode ofthe total counter and the maintenance counter. (A3/11x17 size) | ||
| 6 | Used to set the specifications (paper, fixed magnification ratio, etc.) ofthe destination. | ||
| 7 | Used to set the machine ID. | ||
| 8 | Counter mode setting (Long scale) | ||
| 10 | Used to set the trial mode of the network scanner. | ||
| 18 | Used to set Disable/Enable ofthe toner save mode operation. (Forthe Japan and the UK versions.) | ||
| 30 | Used to set the operation mode corresponding to the CE mark (Europe safety standards). (For slow start to drive the fusing heater lamp) |
||
| 32 | Used to set the specifications ofthe fusing cleaning operation. | Fusing | |
| 35 | Used to set the display mode of SIM 22-4 trouble history when a same trouble occurred repeatedly. There are two display modes: display as one trouble and display as several series oftroubles. |
||
| 38 | Used to set Continue/Stop of print when the maintenance life is reached. | ||
| 41 | Used to set Enable/Disable ofthe magnification ratio automatic select function (AMS) in the center binding mode. | ||
| 49 | Used to set the print speed of postcards mode. | ||
| 50 | Used to set functions. | ||
| 51 | Used to set the specifications ofthe serial port operation. (For PCI) | ||
| 52 | Used to set whether non-printed paper (insertion paper, cover paper) is counted up or not. | ||
| 53 | User auto color calibration (color balance adjustment) Inhibit/Allow setting. | ||
| 60 | Used to set utility counter mode. | ||
| 65 | Used to set the finisher alarm mode. | ||
| 69 | Used to set the operating conditions for toner near end. | ||
| 71 | Used to set the trial mode ofthe web browsing function. | ||
| 73 | Enlargement continuous shoot, A3 wide copy mode image loss (shade delete quantity) adjustment | ||
| 74 | Used to set the OSA trial mode. | ||
| 78 | Used to set the password ofthe remote operation panel. | ||
| 79 | Used to set YES/NO ofthe pop-up display of user data delete result. | ||
| 27 | 1 | Used to set non-detection of communication error (U7-00) with RIC. (FSS function) | |
| 2 | Used to set the sender's registration number and the HOST server telephone number. (FSS function) | ||
| 4 | Used to set the initial call and toner order auto send. (FSS function) | ||
| 5 | Used to set the machine tag No. (This function allows the host computer to check the machine tag No.) (FSS function) | Communication (RIC/MODEM) | |
| 6 | Used to set ofthe manual service call. (FSS function) | ||
| 7 | Used to set ofthe enable, alert callout. (FSS function) | ||
| 9 | Used to set the paper transport time recording YES/NO threshold value and shading gain adjustment retry number. (FSS function) | ||
| 10 | Used to clear the trouble prediction history information. (FSS function) |