Sharp MX3640N

General and purpose

The simulation mode has the following function s, to display the machine operating status, identify the trouble position and causes in an earlier stage, and to efficiently setup and adjust the machine for improved serviceability.

1. Various adjustments
2. Setting of the specifications and functions
3. Canceling troubles
4. Operation check
5. Counters check, setting, clear
6. Machine operating conditions (operation hysteresis), data check, clear.
7. Various (adjustments, setting,operation, counters, etc.) data transport.

Entering the simulation mode

1. Double-click the[HOME]key . (Total usequantity/T oner remaining quantity display mode screen)
   
2. Touch theVERdisplaysection.(10 -key modeinput mode screen)
3. Touch the (#) key → Asterisk (*) key → Clear key → Asterisk (*) key → Ready for input of main code of simulation.
4. Enter amain SIM codewiththe10-keyp ad thentouchthe START key or select a main code from the SIM key list on the touch panel.
5. Enter a sub code with the 10-key pad, then touch the START key or select a sub code from the code list on the touch panel.
6. Select an item with the scroll key and the item key.
7. The machine enters the mode corresponding to the selected item. Press [START] key or [EXECUTE] key to start the simu­lation operation.
   To cancel the current simulation mode and change the main code and the sub code, press [BACK] key.

Canceling the simulation mode to return to the normal mode

1. Press [EXIT] key.

Important

Do not turn OFF the power when the machine is in the simulation mode.
If the power switch should be turned OFF in the simulation mode, a malfunction may be resulted. In this case, tur n OFF/ON the main power source