| Main |
Sub |
Functions |
Section |
| 30 |
1 |
Used to check the operations of the sensors and the detectors in other than the paper feed section and the control circuits. |
|
| 2 |
Used to check the operations of the sensors and the detectors in the paper feed section and the control circuits. |
|
| 33 |
2 |
Used to delete the ID (IDM) information of Felica card. |
|
| 40 |
2 |
Manual paper feed tray paper width sensor adjustment. |
Paper feed |
| 7 |
Used to set the adjustment value of the manual paper feed tray paper width sensor. |
Paper feed |
| 41 |
1 |
Used to check the operations of the document size sensor and the control circuit. |
|
| 2 |
Used to adjust the document size sensor detection level. |
|
| 3 |
Used to check the operations of the document size sensor and the control circuit. |
|
| 43 |
1 |
Used to set the fusing temperature in each mode. |
|
| 4 |
Used to set the fusing temperature 2 in each mode. (Continued from SIM 43-1.) |
|
| 20 |
Used to set the environmental correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
| 21 |
Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper mode. |
|
| 22 |
Used to set the environment correction under low temperature and low humidity (L/L) for the fusing temperature setting (SIM 43-4) in each paper mode. |
|
| 23 |
Used to set the environment correction under high temperature and high humidity (H/H) for the fusing temperature setting (SIM 43-4) in each paper mode. |
|
| 24 |
Used to set the correction of the temperature adjustment value of SIM 43-1 and 43-4. |
|
| 31 |
Used to check the operation of the fusing web cleaning. |
Fusing |
| 32 |
Used to set various items related to the forcible operation of web cleaning when job end. |
Fusing |
| 44 |
1 |
Used to set each correction operation function in the image forming (process) section. |
Image process (Photoconductor/ Developing/Transfer/Cleaning) |
| 2 |
Used to adjust the sensitivity of the image density sensor (registration sensor). |
Process |
| 4 |
Used to set the conditions of the high density process control operation. |
Process |
| 6 |
Used to execute the high density process control forcibly. |
Process |
| 9 |
Used to display the result data of the high density process control operation. |
Image process (Photoconductor/ Developing/Transfer/Cleaning) |
| 12 |
Used to display the operation data of the high density process control and the image density sensor (registration sensor). |
Image process (Photoconductor/ Developing) |
| 14 |
Used to display the output level of the temperature and humidity sensor. |
Process (OPC drum, development)/ Fusing/LSU |
| 15 |
Used to set the OPC drum idle rotation. |
Process |
| 21 |
Used to set the halftone process control target. |
Process |
| 22 |
Used to display the toner patch density level in the halftone process control operation. |
Process |
| 24 |
Used to display the correction target and the correction level in the halftone process control operation. |
Process |
| 25 |
Used to set the calculating conditions of the correction value for the halftone process control. |
Process |
| 26 |
Used to execute the halftone process control compulsory. |
Process |
| 27 |
Used to clear the correction data of the halftone process control. |
Process |
| 28 |
Used to set the process control execution conditions. |
Process |
| 29 |
Used to set the operating conditions of the process control during a job. |
Process |
| 31 |
Used to adjust the OPC drum phase. (Manual adjustment) |
Process |
| 37 |
Used to set the development bias correction level in the continuous printing operation. |
|
| 43 |
Used to display the identification information of the developing unit. |
Developing system |
| 62 |
Used to set the process control execution conditions. |
Process |
| 46 |
1 |
Used to adjust the copy density in the copy mode. |
|
| 2 |
Used to adjust the copy density in the copy mode. |
|
| 4 |
Used to adjust the density in the image send mode. |
|
| 5 |
Used to adjust the density in the image send mode. |
|
| 8 |
Used to adjust the image send mode color balance RGB. |
|
| 9 |
Used to adjust the scan image density. |
|
| 10 |
Used to adjust the copy color balance and the gamma (for each color copy mode). |
|
| 16 |
Used to adjust the monochrome copy density and the gamma (for each monochrome copy mode). |
|
| 19 |
Used to set the operating conditions for the density scanning (exposure) of monochrome auto copy mode documents. |
|
| 21 |
Copy color balance adjustment (Manual adjustment) |
|
| 23 |
Used to set the density correction of copy high density section (High density tone gap supported). |
|
| 24 |
Copy color balance adjustment (Auto adjustment) |
|
| 25 |
Used to adjust the copy color balance. (Single color copy mode) |
|
| 26 |
Used to reset the single color mode color balance set value to the default. |
|
| 27 |
Used to adjust the gamma/density of copy images, texts, and line image edges. |
|
| 30 |
Used to adjust the resolution in the sub scanning direction in the copy mode. |
|
| 32 |
Used to adjust the document background density reproducibility in the monochrome auto copy mode. |
|
| 36 |
Used to adjust the colors in the 2-color copy mode. |
|
| 37 |
Used to adjust the reproduction capability of monochrome mode color. |
|
| 38 |
Used to adjust the black component amount in the color copy mode. |
|
| 39 |
Used to adjust the sharpness of FAX send images. |
|
| 40 |
Used to adjust the FAX send image density. (Collective adjustment of all the modes) |
|
| 41 |
Used to adjust the FAX send image density. (Normal) |
|
| 42 |
Used to adjust the FAX send image density. (Fine) |
|