Sharp MX3111U

General and purpose

The simulation mode has the following functions, to display the machine operating status, identify the trouble position and causes in an earlier stage, and to efficiently setup and adjust the machine for improved serviceability.

1. Various adjustments
   
2. Setting of the specifications and functions
3. Canceling troubles
4. Operation check
5. Counters check, setting, clear
6. Machine operating conditions (operation hysteresis), data check, clear.
7. Various (adjustments, setting, operation, counters, etc.) data transport.

The operating procedures and displays depend on the design of the operation panel of the machine.

Starting the simulation

18cpm/20cpm/23cpm/31cpm(G) machine
Entering the simulation mode

1. Machine in Copy mode: Select Program key → Asterisk (*) key → Clear key → Asterisk (*) key → Ready for input of main code of simulation.
2. Entering a main code with the 10-key → START key ON. Or select a main code with the SIM key on the touch panel.
3. Entering a sub code with the 10-key → START key ON.
4. Select an item with the scroll key and the item key.
5. The machine enters the mode corresponding to the selected item. Press [START] key or [EXECUTE] key to start the simulation operation.
   To cancel the current simulation mode and change the main code and the sub code, press [SYSTEM SETTING] key.

Canceling the simulation mode to return to the normal mode

1. Press [CA] key.

26cpm/36cpm/31cpm (A) machine

1. Double-click the [HOME] key. (Total use quantity/Toner remaining quantity display mode screen)
2. Touch the VER display section. (10-key mode input mode screen)
3. Touch the (#) key → Asterisk (*) key → Clear key → Asterisk (*) key → Ready for input of main code of simulation.
4. Enter a main SIM code with the 10-key pad then touch the START key or select a main code from the SIM key list on the touch panel.
5. Enter a sub code with the 10-key pad, then touch the START key or select a sub code from the code list on the touch panel.
6. Select an item with the scroll key and the item key.
7. The machine enters the mode corresponding to the selected item. Press [START] key or [EXECUTE] key to start the simulation operation. To cancel the current simulation mode and change the main code and the sub code, press [BACK] key.

Canceling the simulation mode to return to the normal mode

1. Press [EXIT] key.

Do not turn OFF the power when the machine is in the simulation mode.
If the power switch should be turned OFF in the simulation mode, a malfunction may be resulted. In this case, turn OFF/ON the main power source.