Sharp MX3050N
Simulation mode. List of Classic mode. Codes 63-1 - 66-21
Sim No. | Installation | Maintenance | Adjustment and Settings | |
---|---|---|---|---|
63-1 | Used to display the shading correction result | |||
63-2 | Used to perform shading | 1-5 | 3 | |
63-3 | Used to perform scanner (CCD) color balance and gamma auto adjustment | 1-5 | 2-3 | 3 |
63-4 | Used to display the scanner test chart patch density | |||
63-5 | Used to perform the scanner (CCD) color balance and gamma default setting | 2-3 | 3 | |
63-7 | Used to register the service target of the copy mode auto color balance adjustment | 5 | ||
63-8 | Used to set the default of the service target of the copy mode auto color balance adjustment | 5 | ||
63-11 | Used to set the target color balance of the copy mode auto color balance adjustment | 5 | ||
64-1 | Test print (self print) (color mode) | |||
64-2 | Test print (self print) (monochrome mode) | 8 | ||
64-4 | Printer test print (self print) | |||
64-5 | Printer test print (self print) (PCL) | 1-4 | ||
64-6 | Printer test print (self print) (PS) | |||
65-1 | Used to adjust the touch panel (LCD display section) detection coodinates | 7 | ||
65-2 | Used to display the touch panel (LCD display section) detection coodinates | |||
65-5 | Used to check the operation panel key input | |||
66-1 | Used to display the image send-related soft SW (2-150) on the LCD to allow changing the soft SW while checking with the LCD |
2-3 | ||
66-2 | Used to enter a country code and set the default value for the country code | |||
66-3 | Used to check read/write of the EEPROM and the SDRAM on the MODEM controller and display the result |
|||
66-4 | Used to send the selected signals to the line and the main unit speaker (send level: max) | |||
66-5 | Used to send the selected signal to the line and the main unit speaker (send level: soft SW setting) |
|||
66-6 | Used to print the confidential registration check table (BOX No, BOX name, passcode | |||
66-7 | Used to output all image data saved in the image memory | |||
66-8 | Used to send the selected sound message to the line and the speaker (send level: max) | |||
66-9 | Used to send the selected sound message to the line and the speaker (send level: soft SW setting) | |||
66-10 | Used to clear the FAX and image send image data | |||
66-11 | Used to send the selected signal at 300bps to the line and the speaker (send level: max) | |||
66-12 | Used to send the selected signal at 300bps to the line and the speaker (send level: soft SW setting) | |||
66-13 | Used to register dial number for Sim66-14/15/ 16 dial test | |||
66-14 | Used to execute the dial pulse (10pps) send test and to adjust the make time | |||
66-15 | Used to execute the dial pulse (20pps) send test and to adjust the make time | |||
66-16 | Used to execute the DTMF signal send test and to adjust the send level | |||
66-17 | Used to send the DTMF signal to the line and the speaker (send level: max) | |||
66-18 | Used to send the DTMF signal to the line and the speaker (send level: soft SW setting) | |||
66-21 | Used to print the selected items (system error, protocol monitor) |