Sharp MX3050N
Simulation mode. List of Classic mode. Codes 26-2 - 27-17
Sim No. | Installation | Maintenance | Adjustment and Settings | |
---|---|---|---|---|
26-2 | Used to set the paper size of the large capacity tray (LCC) | 2-1 | ||
26-3 | Used to set the specifications of the auditor | 2-1 | ||
26-5 | Used to set the count mode of the total counter and the maintenance counter | 2-2 | ||
26-6 | Used to set the specifications of the destination | |||
26-7 | Used to set the machine ID | |||
26-8 | Used to set the counter mode (long scale) | 2-2 | ||
26-10 | Used to set the trial mode of the network scanner | |||
26-18 | Used to set Disable/Enable of the toner save mode operation | 2-4 | ||
26-30 | Used to set the operation mode corresponding to the CE mark | |||
26-32 | Used to set the specifications of the fusing cleaning operation | |||
26-35 | Used to set the display/mode of Sim 22-4 trouble history when a same trouble occurred repeatedly. There are two display modes. Display as one trouble and display as several series of troubles | |||
26-38 | Used to set continue/stop of print when the maintenance life is reached | |||
26-41 | Used to set Enable/Disable of the magnification ratio automatic select function in the center binding mode | |||
26-49 | Used to set the print speed of postcard mode | |||
26-50 | Used to set functions | 2-1 | ||
26-52 | Used to set whether non-printed paper is counted up or not | 2-2 | ||
26-65 | Used to set the finisher alarm mode | 2-1 | ||
26-66 | Simulation password setting | |||
26-69 | Used to set the operating conditions for toner near end | 2-4 | ||
26-73 | Enlargement continuous shoot, A3 wide copy mode image loss adjustment | |||
26-74 | Used to set the OSA trial mode | |||
26-78 | Used to set the password of the remote operation panel | 2-1 | ||
26-79 | Used to set Yes/No of the pop-up display of security | |||
26-85 | Simulation function setting | |||
27-2 | Used to set the sender's registration number and the HOST server telephone number | 2-5 | ||
27-4 | Used to set the initial call and toner order auto send |
2-5 | ||
27-5 | Used to set the machine tag No. | |||
27-6 | Used to set of the manual service call | |||
27-7 | Used to set of the enable, alert callout | 2-5 | ||
27-9 | Used to set the paper transport time recording Yes/No threshold value and shading gain adjustment retry number | 2-5 | ||
27-10 | Used to clear the trouble prediction history information | |||
27-11 | Used to check the serial communication retry number and the scanner gain adjustment retry number history | |||
27-12 | Used to check the high density, halftone process control and the automatic registration adjustment error history | |||
27-13 | Used to check the history of paper transport time between sensors | |||
27-14 | Used to set the FSS function connection test mode | 2-5 | ||
27-15 | Used to display the FSS connection status | 2-5 | ||
27-16 | Used to set the FSS alert send | 2-5 | ||
27-17 | Used to set the FSS paper order alert | 2-5 |