Sharp ARB351WT

×: Check (Clean, replace, or adjust according to necessity) ○: Clean ▲: Replace △ : Adjust ✩: Lubricate

Section	No.	Part name	When calling	100k	200k	300k	Remarks
Developing section	1	Developer	—	▲	▲	▲	Replace when the specified rotation number is reached
	2	DV filter	—	▲	▲	▲	Replace the DV filter at the same time as replacing the developer.
	3	DV blade	×	×	×	×	Replace as needed
	4	Side seat	×	×	×	×	Replace as needed
	5	DV paper guide	○	○	○	○
Transfer section	1	Transfer unit	×	▲	▲	▲	Replace at (100K) or 2 years of use
Fusing section	1	Fusing unit	×	▲	▲	▲	Replace at (100K) or 2 years of use
Main unit filter section	1	Inspiration filter	×	○	○	○
Paper feed section	1	Paper pick up roller	○	○	○	○	Replacement reference: Replace referring to the paper feed counter value at each tray Paper feed tray: When 100K is reached or 1 years of use. Manual paper feed tray: When 100K is reached or 1 year of use.
	2	Paper feed roller	○	○	○	○
	3	Separation roller	○	○	○	○
	4	Torque limiter	×	—	—	—
Transport section/Paper reverse section/Paper exit section	1	PS roller (Idle)	×	○	○	○
	2	rollers	×	○	○	○
	3	Transfer paper guides	○	○	○	○
	4	Discharge brush	×	×	×	×
	5	Gears	×	—	—	—	Apply grease to the specified position as needed
	6	Belts	×	—	—	—
	7	Sensors	×	—	—	—	Blow air to clean reflection type sensor section
	8	Process control sensor	×	○	○	○	Clean with air blow when replacing drum cartridge, developer
Drive section	1	Gears (grease)	×	—	—	—	Apply grease to the specified position as needed
	2	Shafts earth section (conductor grease)	×	—	—	—	Apply grease to the specified position as needed