Sharp ARB351WT
Maintenance. 2. Display of maintenance execution timing 1
The message of maintenance execution timing is displayed when each counter reaches the set value. The relations between the message and the counters are shown below.
A. Maintenance counter
| Display content | Display condition | Print JOB Enable/ Disable |
||
| Sim26-38-A set value | Counter name | Counter value | ||
| Maintenance required: TA | 0 (Print continue) | Maintenance counter (Total) | When SIM21-1 set value is reached |
Enable |
| 1 (Print stop) | When 90% of SIM21-1 set value is reached | |||
| Maintenance required: TA | 1 (Print stop) | When SIM21-1 set value is reached |
Disable | |
* After execution of maintenance, be sure to execute SIM24-4 to clear the maintenance counter (Total).
B. Transfer unit
Display content |
Display condition |
Print JOB Enable/ |
||
Sim26-38-A set value |
Counter name |
Counter value |
||
Maintenance required: TK |
0 (Print continue) |
Transfer roller print counter |
When 100K is reached |
Enable |
1 (Print stop) |
||||
* After execution of the maintenance, execute SIM24-4 to clear the print counter, the accumulated rotation counter and the use day counter of TC ROLLER.
C. Fusing unit
| Display content | Display condition | Print JOB Enable/ Disable |
||
| Sim26-38-A set value | Counter name | Counter value | ||
| Maintenance required: FK1 | 0 (Print continue) | Fusing roller print counter | When 100K is reached | Enable |
| 1 (Print stop) | ||||
| Maintenance required: FK2 | 0 (Print continue) | Pressure roller print counter | Enable | |
| 1 (Print stop) | ||||