Samsung Xpress M2885FW
Service Mode. EDC mode. Test Routines
This menu can perform the operation test for the main components.
Code | Displayed Name | Meaning | Input / Output | State Displayed |
---|---|---|---|---|
100-0000 | Main BLDC Motor | Main BLDC Motor is On/Off | Output | On[Off] |
100-0010 | Main BLDC Motor Ready | Detect if Main BLDC Motor runs at normal speed | Input | High[Low] |
101-0010 | T1 Pick-Up Clutch | Engages drive to pick up a paper from tray1. | Output | On[Off] |
101-0050 | Registration Clutch | Engages drive to registartion rolls. | Output | On[Off] |
101-0190 | Out-Bin Full Sensor | Detect when a paper is at Duplex Ready sensor. | Input | High[Low] |
102-0010 | T1 Paper Empty Sensor | Detect when paper is in Tray1. | Input | High[Low] |
102-0290 | Feed Sensor | Detect when a paper is at Feed sensor. | Input | High[Low] |
102-0360 | Regi. Sensor | Detect when a paper is at Regi. sensor. | Input | High[Low] |
102-0370 | Exit Sensor | Detect when a paper is at Exit. sensor. | Input | High[Low] |
105-0030 | Black MHV Bias | Black MHV bias voltage on at normal drive level | Output | On[Off] |
106-0030 | Black Dev Bias | Black Dev bias voltage on at normal drive level | Output | On[Off] |
107-0030 | Black THV Bias | Black THV bias voltage on at normal drive level | Output | On[Off] |
107-0031 | Black THV(-) Bias | Black THV bias voltage on at normal drive level | Output | On[Off] |
107-0070 | Black THV Bias Read | Detect what the THV value is on the THV Roller | Input | Numeric 3 digits |
109-0000 | Fuser Temperature A | Detects what the temperature A is on fuser. | Input | Numeric 3 digits |
109-0040 | Fuser Fan Run | Fuser Fan Motor On/Off | Output | On[Off] |
109-0050 | Fuser Bias | Fuser bias voltage on at normal drive level | Output | On[Off] |
110-0000 | LSU Motor1 Run Ready | Detects if LSU motor1 runs at normal speed. | Input | High[Low] |
110-0060 | LSU Motor1 Run | LSU Motor1 On/Off | Output | On[Off] |
110-0110 | LSU LD Power4 | LSU LD4 Power On/Off (black) | Output | On[Off] |