Samsung Xpress M2875ND
Service Mode. 1. How to Enter
In service (tech) mode, the technician can check the machine and perform various test to isolate the cause of a malfunction. While in Tech mode, the machine still performs all normal operations.
Entering the Tech Mode
Press “Menu > # > 1 > 9 > 3 > 4” on the control panel.
Tech mode menu
Depth 1 | Depth 2 | Depth 3 | Depth 4 |
---|---|---|---|
Data Setup | Send Level | [9-15] | 12 |
DTMF Level | High [0-15] | Low [0-15] | |
Pause Time | [1-9] | ||
Dial Mode | Tone,Pulse | Tone | |
Modem Speed | 33.6, 28.8, 14.4, 12.0, 9.6, 4.8 | 33.6 | |
Error Rate | 5%, 10% | 10% | |
Clear All Mem. | |||
Toner Low Level | [1:30]:10 | ||
Clear Count | Enter Password [????] | Platen Scan | |
ADF Scan | |||
Transfer Roller | |||
Fuser | |||
Pickup Roller | |||
Retard Roller | |||
Forward Roller | |||
Feed Roller | |||
Engine Footer | Off* | ||
On | |||
Dial Tone | On | ||
Off | |||
Caller ID | On | ||
Off | |||
Machine Test | Switch Test | ||
Test Param Set | |||
Modem Test | |||
Dram Test | |||
Rom Test | |||
Shading Test | |||
Report | All Report | ||
Protocol | |||
Supplies Info | |||
Configuration | |||
Error Info | |||
Usage Counter | |||
Component Check | |||
Fax Options | |||
EDC Mode | NVM Initialize | ||
NVM Read Write | Refer to NVM Read Write table. | ||
Test Routine | Refer to Test Routine. |