Code |
Display |
Meaning |
100-0000 |
0000-Main BLDC |
Main BLDC Motor is On/Off |
100-0001 |
0001-Main BLDC Slow |
Main BLDC Motor Slow(50% speed) On/Off |
100-0010 |
0010-Main BLDC Rdy |
Detect if Main BLDC Motor runs at normal speed |
100-0191 |
0191-System Fan Run |
Start/Stop System (Main) Fan run |
100-0241 |
0241-Waste Ton LED |
Waste Toner Led On/Off |
100-0250 |
0250-Waste Ton Sens |
Detect if the waste toner is full or not. Display Waste Tank Full adc |
101-0010 |
0010-Tray1 Pickup |
Engages drive to pick up a paper from tray1. |
101-0050 |
0050-Registration |
Engages drive to registartion rolls. |
101-0190 |
0190-OutBin Full |
Detect when a paper is at Outbinfull sensor. |
101-0201 |
201-Dev Cam Clutch |
Rotate Deve cam |
101-0202 |
202-Dev Relay1 |
Turn on the deve relay1 |
101-0203 |
203-Dev Relay2 |
Turn on the deve relay2 |
101-0204 |
204-Dev Relay3 |
Turn on the deve relay3 |
101-0205 |
204-Dev Relay4 |
Turn on the deve relay4 |
101-0210 |
0210-ITB Clutch |
Engages drive to ITB Cleaning Blade |
101-0231 |
0231-T2 Nip Release |
T2 Nip Release |
101-0260 |
0260-Cover Open Sensor |
Check if the set main cover is open or not |
102-0010 |
0010-Tray1 Empty |
Detect when paper is in Tray1. |
102-0360 |
0360-Regi Sens |
Detect when a paper is at Regi. sensor. |
102-0370 |
0370-Exit Sens |
Detect when a paper is at Exit. sensor. |
105-0032 |
0032-MHV Bias |
MHV bias voltage on at normal drive level |
106-0037 |
0037- Dev Bias |
Dev bias voltage on at normal drive level |
106-0038 |
0038- Dev AC Bias |
Dev bias AC voltage on at normal drive level |
107-0032 |
0032-THV Bias |
THV plus bias voltage on at normal drive level |
107-0033 |
0033-THV- Bias |
THV minus bias voltage on at normal drive level |
107-0080 |
0080-iTHV + |
iTHV plus bias voltage on at normal drive level |
107-0160 |
0160-Erase Lamp |
Erase Lamp 1 |
109-0000 |
0000-Temp A |
Detects what the temperature A is on fuser. |
110-0000 |
0000-LSU Motor1 Rdy |
Detects if LSU motor1 runs at normal speed. |
110-0060 |
0060-LSU Motor1 Run |
LSU Motor1 On/Off |
110-0111 |
0080-LD Power |
LSU LD Power On/Off with normal LD Power |
111-0080 |
0080-ID Sensor |
Start ID sensor sensing On/Off |
111-0090 |
0090-IC Sensor Chk |
Display ID sensor reading value |