Samsung SLX7400LX
Service Mode. Information
General
- Information > General
This menu displays the following informations.
- Machine Serial Number
- Ethernet IP Address
- Ethernet Mac Address
- Optional Ethernet IP Address
- Optional Ethernet Mac Address
- Total Printed Impressions Machine
- Installed Date & Time
Customer Replacement Unit (CRU)
- Information > Supply Status > Customer Replacement Unit
This menu displays the machine’s customer replacement unit status. Users can select one item in the list to check the information of the selected unit.
Field Replacement Unit (FRU)
- Information > Supply Status > Field Replacement Unit
This menu displays the machine’s field replacement unit status. Users can select one item in the list to check the information of the selected unit.
In this menu, there are five columns : Item, Threshold, Status, Count, Maximum Life. - Status : This shows the current status of the selected item.
- OK : The current count is smaller than the default warning value
- Check : The current count is bigger than default warning value
- OFF : The current count exceeds the max life. - Count : This shows the current count of the selected item.
- Maximum life : This shows the max capacity of the selected item.
The technician can edit the default warning value within the given threshold.
Selecting some items will enable the reset button to reset the current count to 0 after replacing the unit.
Software Version
- Information > Software Version
This menu displays all the version of the software installed in the system in detail.
Service Hours
- Information > Service Hours
This menu displays two items, “Power on Hours”, “Power Save Hours”.
- Power on Hours : It indicates the hours of system power on since the first booting of the system.
- Power Save Hours : It indicates the hours of system power save since the first booting of the system.
Fault Log
- Information > Fault Log
This menu displays faults occurred while the system was operating.
Pressing clear button will clear all the save fault log of the system.
Print Reports
- Information > Print Reports
This menu displays reports which that can be printed from the system. The following reports will be available to print.
- Supplies Information
- Usage Counter
- Error Information
- Fax Protocol Dump (Line 1)
- Fax Protocol Dump (Line 2)
- Fax Diagnostics (Line 1)
- Fax Diagnostics (Line 2)
- Job Duty
- Auto Toning History
- Maintenance
- Toner Event
Auto Toning History
- Information > Print Reports > Auto Toning History
NOTE: TRC means “Tone Reproduction Curve”.
This report shows history of execution of TRC control. TRC control preserves color consistency against changes in supplies resulting from long-time use and environmental change. The purpose of the history report is to check if TRC control works normally. - If TRC control performs normally, “Pass” count must be non-zero value and “Fail” count must be zero.
- If “Fail” count is not zero, the image density sensor needs to be checked
Export Reports
- Information > Export Reports
This menu exports report to usb stick. Configuration, Error Information, Supplies Information, Usage Counter Reports
are exported as the form of selected format.