Samsung SLM2875FD
Service Mode. 1. How to Enter
In service (tech) mode, the technician can check the machine and perform various test to isolate the cause of a malfunction. While in Tech mode, the machine still performs all normal operations.
Entering the Tech Mode
Press “Menu > # > 1 > 9 > 3 > 4” on the control panel.
Tech mode menu
| Depth 1 | Depth 2 | Depth 3 | Depth 4 |
|---|---|---|---|
| Data Setup | Send Level | [9-15] | 12 |
| DTMF Level | High [0-15] | Low [0-15] | |
| Pause Time | [1-9] | ||
| Dial Mode | Tone,Pulse | Tone | |
| Modem Speed | 33.6, 28.8, 14.4, 12.0, 9.6, 4.8 | 33.6 | |
| Error Rate | 5%, 10% | 10% | |
| Clear All Mem. | |||
| Toner Low Level | [1:30]:10 | ||
| Clear Count | Enter Password [????] | Platen Scan | |
| ADF Scan | |||
| Transfer Roller | |||
| Fuser | |||
| Pickup Roller | |||
| Retard Roller | |||
| Forward Roller | |||
| Feed Roller | |||
| Engine Footer | Off* | ||
| On | |||
| Dial Tone | On | ||
| Off | |||
| Caller ID | On | ||
| Off | |||
| Machine Test | Switch Test | ||
| Test Param Set | |||
| Modem Test | |||
| Dram Test | |||
| Rom Test | |||
| Shading Test | |||
| Report | All Report | ||
| Protocol | |||
| Supplies Info | |||
| Configuration | |||
| Error Info | |||
| Usage Counter | |||
| Component Check | |||
| Fax Options | |||
| EDC Mode | NVM Initialize | ||
| NVM Read Write | Refer to NVM Read Write table. | ||
| Test Routine | Refer to Test Routine. |