Samsung SLC3060FR

• Service Functions > SFE

Special Feature Enablement (SFE) means to provide the configurable options (On/Off) in service mode for technicians or dealers to satisfy the requirements from B2B sites easily without changing the firmware installed in a device.

SFE Code	Description
001	In case of printing in directional media (Letterhead/Preprinted/Punched), the device prints as the same output direction regardless of simplex or duplex.
002	The device always prints output as mono about PC printing.
007	The device prints as original 1 dot line without 2 dot line compensation.
008	The device ignores paper size command in PRN and prints as paper size in tray.
009	PJL readback response is changed with HPOS. Add <CR><LF> to EOJ response. No EOJ job but EOJ response occurs. Device uses Job name instead of EOJ name.
010	Maximum value of 'Power save time' is increased as 240 min.
012	If the device is in jam status, all print jobs except secure or stored jobs are deleted automatically.
013	The device ignores the USB memory stick and detects only card reader.
014	When the authenticated user uses scan to email, user's email address is added automatically.
019	User ID is not case-sensitive for login
024	The device executes copy job as only mono even though color copy is started.
032	If this SFE option is enabled, the image processor shall not omit line that is less than 1 dot. By PCL 6 command rule, the device shall not print less than 1 dot line. But this SFE is enabled, the device shall print it.
033	If this SFE option is enabled, the image processor shall draw Letter Gothic font as previous thickness(Bitstream) thicker than URW++.
035	The device shall provide auto scale for A3/Leger to A4/Letter in case of A4 Models that doesn't support A3/Ledger size.
037	The device shall permit or ignore host printing job by permit key PJL command from solution such as IPRINT.