Samsung SLC1860FW
Service Mode. Tech Mode Menu. Information, Report
Information
• General
This menu displays the machine’s serial number, assigned IP address.
• Software Version
This menu displays all the version of the software installed in the system in detail.
• Report
You can print the various report that is stored in system.
Report
• Shading Test
This function is to check quality of scanned images, especially defect in optical devices, including lens, mirror, lamp, and etc, are suspected.
• Memory Clear
The function resets the system to factory default settings. This function is used to reset the system to the initial value when the product is functioning abnormally . All the values are returned to the default values, and all the information, which was set by the user, will be erased.
• Toner Low Level
The function is to set up the time to inform toner low status. This function can provide user convenience for replacing the toner cartridge.
• Counter Reset
This function resets the count value you select.
• Engine Footer
This function is for monitoring of the engine status. If you perform this function, at printing, the setting value for engine is shown on the bottom of the printed page.