Samsung SCX3405W
Service Mode 4 in 1 model. 1 Entering
In service (tech) mode, the technician can check the machine and perform various test to isolate the cause of a malfunction. While in Tech mode, the machine still performs all normal operations.
Tech mode (4 in 1 model)
Entering Tech mode
- Press “Menu > # > 1 > 9 > 3 > 4” on the control panel continuously.
- Press Menu.
- Select “Tech Mode”.
Tech mode menu
NOTE
This function does not supported for SCX-340x/SCX- 340xW Series.
Depth 1 | Depth 2 | Depth 3 |
---|---|---|
Data Setup | Send Level | [9-15] |
DTMF Level | High [0-15] | |
Pause Time | [1-9] | |
Dial Mode | Tone, Pulse | |
Modem Speed | 33.6, 28.8, 14.4, 12.0, 9.6, 4.8 | |
Error Rate | 5%, 10% | |
Clear All Mem. | ||
Toner Low Level | [1:30]:10 | |
Clear Count | ||
Engine Footer | Off, On | |
Dial Tone | Off, On | |
Caller ID | Off, On | |
Wrap Jam Clear | Yes, No | |
Machine Test | Switch Test | |
Modem Test | ||
Dram Test | ||
Rom Test | ||
Shading Test | ||
Scan Aging | ||
Report | All Report | |
Protocol | ||
Supplies Info | ||
Configuration | ||
Error Info | ||
Usage Counter | ||
Component Check | ||
Fax Options | ||
EDC Mode | NVM Initialize | |
NVM Read Write | ||
Test Routine |