Samsung SCX1350F

The following functions will be initiated by holding a series of buttons simultaneously. Some initiate as the power is applied to the unit, others activate from the READY state.

The order of the button presses* in the “Button” column is a follows for SCX-1350F:

* Note: The button presses that only require two buttons being pushed work the following way. Press the first button, then hold it while pressing the second button. All other button presses rules are explained in the “Function” notes.

“on”	No mech init	Product initializes without doing any mechanical checks. Allows front panel access to ready state button access functions. Power recycle returns the product to a normal state. Initiate at power up.
“#” “3”	Partial Reset	Press the buttons while applying power to the unit. Resets all user configurable settings to default, initializes country and language selection process. Press [ON] to continue to Ready state. Initiate at power up.
“#” “6”	Semi Full Reset	Press the buttons while applying power to the unit. Partial reset plus resets all user personal information (fax journal, header, speed dials). Press [ON] to continue to Ready state. Initiate at power up.
“#” “9”	Full Reset	Press the buttons while applying power to the unit. Semi full reset plus resets all personal information, service ID# and counters. Press [ON] to continue to Ready state. Initiate at power up.
“Lighter/Darker” “Start Copy Color”	Clear Derivative & Full NVM Reset	Press the buttons while applying power to the unit. When wanting to create a generic engine for the service unit pool **Make sure the Ft Panel Bezel is removed when wanting to clear the units derivative
"*" "#" 1, 2, 3	Enter Service Menu	Entering the Service Menu The first two buttons are pressed simultaneously
"*"&"#" then press 1, 2, 4	Enter Underware Menu	Entering the Underware Menu
“Enter” “0”	Counter Report	Prints all usage information, which is tracked by firmware. Initiate in ready state
"Enter" & "Menu"	Bypass pen alignment	By-passing pen alignment to operate unit
“Scan To” “Start Scan”	Initiate internal demo page	Printing out the internal demo page
“Enter” “Start Copy Black”	Serial Number	Display Serial Number
“Enter” “Start Copy Color”	Service ID	Display Service ID
"Enter" & "Number of Copies"	Initiate internal copy quality test (benchrun)	Printing out the 10 page test of different copy modes
"*" & "5" then “Quality” & “Color Copy”	Start internal front panel test	Starts the testing of the front panel.
"*" & "8"	Mfg Nozzle test Pattern	Prints Nozzle test pattern
"#" & "8"	System Error Report	Prints out System error report
“*” & “#”, “9”	Initiate fax trace report	Printing out the internal fax trace report Press * and # simultaneously, then 9
"Enter" & "Cancel"	Initiate extended self test report	Printing out the extended self test page
“Menu” & “Start Copy Color”	Display Information Menu	Viewing the Serial Number, Model Number, Service ID, Country/Language, Total Page Count, Total Power Cycles, Firmware Revision, Last Error Code.