Samsung ProXpress M3820DW

• Clear All Mem.

The function resets the system to factory default settings. This function is used to reset the system to the initial value when the product is functioning abnormally . All the values are returned to the default values, and all the information, which was set by the user, will be erased.
NOTE
Always perform a memory clear after replacing the main board. Otherwise, the system may not operate properly.

• Clear Admin PW

This menu resets the Admin password.

• Toner Low Level

The function is to set up the time to inform toner low status. This function can provide user convenience for replacing the toner cartridge.

• ImgU. Low Level

The function is to set up the time to inform imaging unit low status. This function can provide user convenience for replacing the imaging unit.

• Clear Counts

This function resets the count information for selected item.

• Engine Footer

This function is for monitoring of the engine status. If you perform this function, at printing, the setting value for engine is shown on the bottom of the printed page.

• F/W Upgrade

The function is to upgrade the firmware by using “usblist.exe” file. When updating firmware, you must select “On” for this menu.