Samsung MultiXpress K7400GX

Updating from the Printer Control Panel

WARNING
Failure to follow these instructions could lead to corruption issues and prevent the proper operation of this printer. Follow all of the instructions carefully.

1. Download the firmware file from the Global Service Partner Network (GSPN) or Technical Support Portal (TSP) website.
2. Unzip the firmware file to a folder on your PC.
3. Copy the firmware file (*.hds or *.par) to a USB flash drive.
4. Plug the USB flash drive into the USB port.
5. Press the button on control panel in this order. (Settings > Admin Settings > Application Management > Application > Install)
6. The installation window will list the files on the USB drive. Touch the name of the firmware file to select it.
7. Press the “OK” button after selecting the file.
8. Once the installation is complete, “OK” button will be activated. Press “OK” button.

Updating from the Network

WARNING
Failure to follow these instructions could lead to corruption issues and prevent the proper operation of this MFP. Follow all of the instructions carefully.

Perform the following procedure to update the MFP firmware from the network.

1. Go to the SyncThruWeb Service (SWS) main home page. Login as Admin in Sync Thru Web Service.
   NOTE
   Login using the Administrator ID and Password established during initial machine setup.
2. Click on Maintenance > Application Management > Application > Add.
3. Choose installation file (F/W file) by browsing the file system and click [OK].
4. The uploading step will start.
5. After uploading the f/w file on MFP, validation information will appear. Check the [Overwrite] check-box if you want to force the firmware update even if the firmware version to be installed is lower or same with the currently installed firmware in the device. Press [OK] to start the firmware upgrade.
6. The firmware update will start.
7. Once the installation is complete, the machine power-off and power-on automatically.