Samsung MultiXpress K4250RX
Service Mode. Engine Test Routine 1
• Diagnostics > Engine Diagnostics > Engine Test Routines
| Purpose | To perform test routines for the engine. |
| Operation Procedure | When the main Engine Test Routines window displays, users can navigate through the list of routines that display along with their descriptions. Users can also directly input an EDC code to the text box to find a routine. Users can select a maximum of 3 routines at the same time. After selecting one or multiple routines, pressing the "OK" button will open the test window that lists selected routines. Users can start/stop a desired test routine. |
| Verification | N/A |
| Specification | N/A |
| Reference | N/A |
| Code | Displayed Name | Meaning |
|---|---|---|
| 100-0000 | Main BLDC Motor | Main BLDC Motor is On/Off |
| 100-0001 | Main BLDC Motor Slow | Main BLDC Motor Slow On/Off |
| 100-0010 | Main BLDC Motor Ready | Detect if Main BLDC Motor runs at normal speed |
| 100-0044 | OPC Motor K | Black Opc BLDC Motor is On/Off |
| 100-0049 | K OPC Motor Ready | Detect if Black OPC BLDC Motor runs at normal speed |
| 100-0076 | Ozone Suction Fan Run | Start/Stop Ozone Suction Fan run |
| 100-0077 | Ozone Suction Fan Ready | Detects if Ozone Suction Fan runs at normal speed. |
| 100-0120 | Exit Motor Forward Fast | Exit Motor Forward Fast On/Off |
| 100-0130 | Exit Motor Forward Slow | Exit Motor Forward Slow On/Off |
| 100-0131 | Exit Motor Backward | Exit Motor Forward Backward On/Off |
| 100-0132 | Exit Motor Backward Slow | Exit Motor Forward Backward Slow On/Off |
| 100-0140 | Duplex Motor Forward | Duplex Motor Forward On/Off |
| 100-0141 | Duplex Motor Forward Slow | Duplex Motor Forward Slow On/Off |
| 100-0160 | Duplex Fan1 Run | Start/Stop Duplex Fan1 run |
| 100-0180 | Dupelx Fan1 Run Ready | Detects if Duplex Fan1 runs at normal speed. |
| 100-0200 | T1 Elevating Motor | T1 Elevate Motor On/Off |
| 100-0210 | T2 Elevating Motor | T2 Elevate Motor On/Off (Optional) |
| 100-0220 | T3 Elevating Motor | T3 Elevate Motor On/Off (Optional) |
| 100-0230 | T4 Elevating Motor | T4 Elevate Motor On/Off (Optional) |
| 100-0241 | Waste Toner Led | Waste Toner Led On/Off |
| 100-0250 | Waste Toner Full Sensor | Detect if the waste toner is full or not. |
| 100-0260 | SMPS Fan Run | Start/Stop SMPS Fan run |
| 100-0270 | SMPS Fan Run Ready | Detects if SMPS Fan runs at normal speed. |
| 100-0340 | Feed Motor | Feed Motor is On/Off |
| 100-0370 | Tray1 Pickup Motor | Tray1 Motor is On/Off |
| 100-0371 | Tray1 Pickup Motor Slow | Tray1 Motor Slow On/Off |
| 100-0380 | Tray2 Pickup Motor | Tray2 Motor is On/Off |
| 100-0381 | Tray2 Pickup Motor Slow | Tray2 Motor Slow On/Off |
| 100-0390 | Tray3 Pickup Motor | Tray3 Motor is On/Off |
| 100-0391 | Tray3 Pickup Motor Slow | Tray3 Motor Slow On/Off |
| 100-0400 | Tray4 Pickup Motor | Tray4 Motor is On/Off |
| 100-0401 | Tray4 Pickup Motor Slow | Tray4 Motor Slow On/Off |
| 100-0430 | Exit2 Motor Forward | Exit2 Motor is On/Off |
| 100-0431 | Exit2 Motor Forward Slow | Exit2 Motor Slow On/Off |
| 100-0440 | Exit2 Motor Backward | Exit2 Motor is On/Off |
| 100-0441 | Exit2 Motor Backward Slow | Exit2 Motor Slow Backward On/Off |
| 100-0470 | DCF Feed Motor | DCF Feed Motor is On/Off |
| 100-0480 | Duct Motor | Duct Motor On/Off. |
| 100-0481 | Duct Motor Sensor | Duct Motor Rib Sensing. |
| 101-0000 | Bypass Feed Clutch | Engages drive to pick up a paper from bypass Tray(MP Tray). |
| 101-0050 | Registration Clutch | Engages drive to registartion rolls. |
| 101-0121 | T1 Feed Motor Slow | T1 Feed Motor Slow On/Off |
| 101-0131 | T2 Feed Motor Slow | T2 Feed Motor Slow On/Off |
| 101-0141 | T3 Feed Motor Slow | T3 Feed Motor Slow On/Off |
| 101-0151 | T4 Feed Motor Slow | T4 Feed Motor Slow On/Off |
| 101-0190 | Out-Bin Full Sensor | Detect when a paper is at Out-Bin Full Sensor |
| 101-0191 | Out-Bin2 Full Sensor | Detect when a paper is at Out-Bin2 Full Sensor |
| 101-0270 | MP Clutch | MPClutch On/Off |
| 101-0271 | MP Solenoid | MP Solenoid On/Off |
| 101-0280 | Return Gate Solenoid | Return Gate Solenoid On/Off |
| 102-0000 | Tray1 Home Position | Detect when tray1 is closed. |
| 102-0010 | T1 Paper Empty Sensor | Detect when paper is in Tray1. |
| 102-0041 | T1 Paper Size Read | Detects Paper Tray1 size. |
| 102-0050 | T1 Stack Height Sensor | Detects if paper in tray1 is elevated to the sensor. |
| 102-0070 | Tray2 Home Position | Detect when tray2 is closed. |
| 102-0080 | T2 Paper Empty Sensor | Detect when paper is in tray2. |
| 102-0111 | T2 Paper Size Read | Detects Paper Tray2 size. |
| 102-0120 | T2 Stack Height Sensor | Detects if paper in tray2 is elevated to the sensor. |
| 102-0140 | Tray3 Home Position | Detect when tray3 is closed. |
| 102-0150 | T3 Paper Empty Sensor | Detect when paper is in tray3. |
| 102-0181 | T3 Paper Size Read | Detects Paper Tray3 size. |
| 102-0190 | T3 Stack Height Sensor | Detects if paper in tray3 is elevated to the sensor. |
| 102-0210 | Tray4 Home Position | Detect when tray4 is closed. |
| 102-0220 | T4 Paper Empty Sensor | Detect when paper is in tray4. |
| 102-0251 | T4 Paper Size Read | Detects Paper Tray4 size. |
| 102-0260 | T4 Stack Height Sensor | Detects if paper in tray4 is elevated to the sensor. |
| 102-0280 | Bypass Paper Empty Sensor | Detects when paper is in Bypass Tray(MP Tray). |
| 102-0290 | Feed Sensor | Detect when a paper is at Feed sensor. |
| 102-0300 | T2 Feed Sensor (or Door Open) | Detect when a paper is at T2 Feed sensor. (optional) |