Samsung MultiXpress K3300NR
Service Mode. Copy Adjustment
• Diagnostics > Adjustment > Copy Adjustment > Image Position
Purpose
Manually adjust copied image position on paper in copy engine
Operation Procedure
NOTE
Before copy adjustment:
- Please make sure that initial values of margin adjustment must be the same as values of print adjustment.
- It is recommended to perform adjustment for each tray at a time. i.e. do not select “All” for tray selection. It often causes confusing for the adjustment.
- The Procedure for copy adjustment is almost same as “Print Adjustment”.
NOTE
- Adjustment must be done for each tray (tray1, tray2, tray3, tray4, MP).
- It is recommended not to choose “ALL” for tray selection.
- It is always better to adjust for a particular tray at each time.
- Select a tray required adjustment.
- Change the adjustment value with ”+”, “-” then press “OK” button to save changes.
• Simplex Leading Edge
• Simplex Side Edge
• Duplex Leading Edge
• Duplex Side Edge - Print out the test pattern and check if the image is moved as you want. If not, repeat stpe2.