PrintCopy.info service

Riso SF9250

 All About this machine
Table Of Contents 

Test Mode. List of Test Modes 0001 - 0083

Unit No. Name Description Setting Model
SF9 SF5*5 SF5*3
Sys /
Panel		 0001 Wakeup Key Check ON: The key is pressed - о о о
Sys /
Panel		 0002 Mechanical Counter
Connection Signal		 ON: The mechanical counter is connected. - о о о
Sys /
Panel		 0003 24V A output signal ON: 24V-A is ON (24 volts output). - о о о
Sys /
Panel		 0004 24V В output signal ON: 24V-B is ON (24 volts output). - о о о
Sys /
Panel		 0005 Back Cover Interlock SW Switch ON (The rear cover of the main unit is attached)
Switch OFF (The rear cover is removed)		 - о о о
Sys /
Panel		 0062 Wakeup LED ON LED illuminates - о о о
Sys /
Panel		 0080 Test Print A (Checkered) Creates Test pattern 1 (Checkered).
The size of the checkered pattern is 128 dots (10.8mm) × 128 dots (5.4mm).
  1. For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied.
  2. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).
 - × о о
Sys /
Panel		 0080 Test Print A (Checkered) Creates Test pattern 1 (Checkered).
The size of the checkered pattern is 128 dots (5.4mm) × 128 dots (5.4mm).
  1. For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied.
  2. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).
 - о × ×
Sys /
Panel		 0081 Test Print В
(Crossed Lines)		 Creates Test pattern 2 (Crossed Lines).
The size of the crossed line pattern is 128 dots (10.8mm) * 128 dots (5.4mm), where the width of a line is 1 dot (0.084mm) * 1 dot (0.042mm).
  1. For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied.
  2. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).
 - × о о
Sys/
Panel		 0081 Test Print В (Crossed
Lines)		 Creates Test pattern 2 (Crossed Lines).
The size of the crossed line pattern is 128 dots (5.4mm) * 128 dots (5.4mm), where the width of a line is 1 dot (0.042mm) * 1 dot (0.042mm).
  1. For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied.
  2. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).
 - о × ×
Sys/
Panel		 0082 Test Print C(Dot1) Creates Test pattern 4 (Dot 1).
The dot pattern where the size of a black dot is 8 dots (0.68mm) * 8 dots (0.34mm)
  1. For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied.
  2. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).
 - × о о
Sys/
Panel		 0082 Test Print C(Dot1) Creates Test pattern 4 (Dot 1).
The dot pattern where the size of a black dot is 8 dots (0.34mm) * 8 dots (0.34mm)
  1. For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied.
  2. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).
 - о × ×
Sys/
Panel		 0083 Test Print D (Dot2) Creates Test pattern 5 (Dot 2).
The dot pattern where the size of a black dot is 16 dots (1,35mm) * 16dots (0.68mm)
  1. For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied.
  2. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).
 - × о о
Sys/
Panel		 0083 Test Print D (Dot2) Creates Test pattern 5 (Dot 2).
The dot pattern where the size of a black dot is 16 dots (0.68mm) * l6dots (0.68mm)
  1. For the printing pressure, the settings from No.1248 (Printing pressure for Test Mode) must be applied.
  2. The printed image must be cut for the paper size (The cut amount is the same as in normal mode).
 - о × ×
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us