Riso SF5330

Test Mode. List of Test Modes 0088 - 0116

Unit	No.	Name	Description	Setting	Model
Unit	No.	Name	Description	Setting	SF9	SF5*5	SF5*3
Sys / Panel	0088	Low-speed Printing Operation	Performs the continuous printing action at 15rpm. The conditions are the same as those of No.0087 (Paper Feed Test), except that the printing pressure and speed control is disabled. The action starts when the rear cover set switch is pressed. When the Start key is pressed, 10 seconds are waited until the rear cover set switch is pressed (A beep sounds until the set switch is pressed).	-	о	о	о
Sys / Panel	0090	Firmware Program Download	When the Start key is pressed, the machine firmware program is downloaded into the printer.	-	о	о	о
Sys / Panel	0094	Unit Initialization	Performs the mechanical initialization. (scanner, TPH, master compression plate, clamp unit, vertical print position, and printing pressure)	-	о	о	о
Sys / Panel	0095	System Configuration Data Output	Creates a master for the Cl system data and makes a print.	-	о	о	о
Sys / Panel	0097	System Parameter, Error Record Print	Creates a master of the list of data setting changes and error history and makes a print.	-	о	о	о
Sys / Panel	0101	Clock Adjustment Confirm	Applies the time set in Test Modes No.0171 - No.0173 to the RTC and starts the clock. This test runs when the Start key is pressed and ends automatically after 0.5 second. * This test must be run after values are set in Test Modes No.0171 - No.0173. This test applies values set in Test Modes No.0171 - No.0173 to the RTC.	-	о	о	о
Sys / Panel	0103	System-parameter adjustment store	Stores information from the flash memory on MAIN-SYSTEM-PCB to the USB memory.	-	о	о	о
Sys / Panel	0104	Drum-parameter adjustment store	Stores the test mode settings from the EEPROM on the print drum PCB to the USB memory. * This test cannot be run when the style differs between the model and the print drum PCB.	-	о	о	о
Sys / Panel	0105	System-parameter adjustment restore	Writes data stored in No.0103 (System-parameter adjustment upload) into the flash memory on MAIN-SYSTEM-PCB. * The power must be turned off and then on after this test mode is run.	-	о	о	о
Sys / Panel	0106	Drum-parameter adjustment restore	Writes data stored in No.0104 (Drum-parameter adjustment upload) into the EEPROM on the print drum PCB. * This test cannot be run when the style differs between the model and the print drum PCB and the style of the stored data differs from that of the main unit.	-	о	о	о
Sys / Panel	0107	Test-mode parameter record	Stores test mode settings and their test numbers into the USB memory if their settings are changed from the default settings.	-	о	о	о
Sys / Panel	0110	Clear Error Status Data	Basically, to clear a jam error status, the jam release procedure should be performed to remove the cause of the jam. However, this test mode can clear a jam error status forcibly, although consumable errors cannot be cleared.	-	о	о	о
Sys / Panel	0111	Clear User Memory	Clears existing data (or resets it to the default) in the user area. The user area, in which users are allowed to edit data, stores memory functions, programs, properties, user mode settings, and other data. Note that the authentication settings are cleared with No.118, rather than this test.	-	о	о	о
Sys / Panel	0112	Clear Test Mode Data Setup (Machine)	Resets all of the test mode settings stored in the machine memory to the default settings. The test mode settings in the protected area are not cleared. This cannot be selected from the menu window. No message appears.	-	о	о	о
Sys / Panel	0113	Maintenance-Master Count Clear	Resets the maintenance master counter that triggers maintenance calls. * When this counter is reset, the maintenance calls (for master making) will no longer appear.	-	о	о	о
Sys / Panel	0114	Maintenance-Copy Count Clear	Resets the maintenance printing counter that triggers maintenance calls. * When this counter is reset, the maintenance calls (for printing) will no longer appear.	-	о	о	о
Sys / Panel	0115	Maintenance-Drum Meter Clear	Resets the maintenance-drum meter that triggers maintenance calls. * When this meter is reset, the maintenance calls (for print drum) will no longer appear.	-	о	о	о
Sys / Panel	0116	Set-up Wizard Initialize	Initializes the user category, basic screen settings, and mode-change method selection (No need to set the clock again).	-	о	×	×

	Error Code
	Service Mode, Troubleshooting
	Parts Catalog
	Compatibility
	Downloads Files
	Home

Email:
Password:

New Register	Forgot Password?