Riso MV Series

Acquiring the Main Motor Parameters

Caution:

Always acquire the main motor parameters after replacing the Mechanical control PCB or the Main motor.

1. Set the first and second print drums in the machine.
2. Activate Test Mode No. 9874 to access into the protect area Test Mode, and run Test Mode No. 1105 (Main Motor Parameter Acquisition Mode).
3. The print drums will begin rotating and obtain the parameters automatically.
4. Check the panel display to confirm that the process is completed.

Acquiring the Second Paper Feed Motor Parameters

Caution:

Always acquire the Second paper feed motor parameters each time the Mechanical control PCB or the Second paper feed motor is replaced.

1. Activate test mode No. 9874 to access into the protected area test mode.
2. Run Test Mode No. 1106 (Second Paper Feed Motor Parameter Acquisition Mode).
3. The guide roller moves to the nipping position against the timing roller, and the second paper feed motor begins to rotate and obtains the parameters automatically.
4. Check the panel display to confirm that the process is complete.