Riso HC5500

Outline diagram

• When an error is generated, numbered LEDs in the diagram light to indicate the location of the error generated. This LED lighting condition provides the following information.
• The color of the LEDs is red.

LED No.	Description	LED No.	Description
1	Paper feed error	11	K ink error
2	Paper transfer error	12	C ink error
3	Exit error	13	M ink error
4	Duplex entry error	14	Y ink error
5	Duplex transfer error	15	Ink set cover error
6	Duplex switchback entry error	16	Waste ink tank error
7	Duplex switchback error	17	Feed tray 1 error
8	Duplex re-feed error	18	Feed tray 2 error
9	Main unit right cover error	19	Base left cover error
10	Main unit left cover error	20	Vertical path upper section error
		21	Option error

Consumable information

• The LEDs in this area indicate the remaining volumes of ink and paper.
• When the levels of K, C, M, and Y inks run low, the corresponding ink color LEDs (orange) lights up.
• When the remaining paper volume in the standard paper feed tray or the feed tray falls to very low levels, the corresponding LED (orange) lights up.
• When all the set inks are in correct operating condition, the [i-fit] LED (green) lights up.

Error types

When an error is generated, the LED (red) corresponding to the type of the generated error lights up.

Name of LED	Description
Ink change	This LED lights up when ink cartridges or the waste ink tank need to be replaced.
Setting check	This LED lights up when a cover is out of position.
Service call	This LED lights up to indicate a service error.
Paper jam	This LED lights up to indicate a paper jam.
Maintenance call	This LED lights up when a scheduled maintenance call interval is approaching or the waste ink tank is reaching full capacity.