Riso HC5500
Test Mode. 1. Operation method
Startup and shutdown of the Test mode
Starting method
- In normal mode (Print mode turned OFF), press the Menu key, (Up) key, and Enter key simultaneously for three or more seconds to display the password input screen.
- Enter the password.
- Test mode is added to the menu to allow operations in Test mode.
▪The Normal mode and Test mode menus are active at the same time.
▪When Test mode is active, the normal menu can also be used to enter settings.
Shutdown method
- Press the Menu key, (Up) key, and Enter key simultaneously for three or more seconds to display the password input screen.
- If incorrect password is entered, the machine will close the Test mode and enter Normal mode standby status (Print mode turned OFF).
Operations in Test mode
Test mode menu
- When Test mode is active, the following test items are added to the menu:
▪ Menu 4 Configuration
▪ Menu 5 Administration
▪ Menu 8 Check/Setting/Adjustment
▪ Menu 9 Test Pattern
▪ Menu 12 (Menu No. input) - From the hierarchical menu, select and run a test item.
- Menu 12 is a check no. input menu for direct selection of a test item. The No. of each hierarchical menu layer with test items is shown as a check no.
Types of Test modes
Test mode offers the following specific test types (modes).
Individual unit check mode (Sensor and switch check) | S | • This mode is used to check the ON/OFF status of sensors and switches. • Buzzer activation is determined by the ON/OFF status. |
Individual unit check mode (Motor and solenoid check) | M | • This mode allows ON and OFF operation of an individual unit such as a motor. |
Group unit check mode | U | • This mode activates operation for a group of units (group unit operation). |
Data check mode | C | • This mode displays the values entered as data. |
Settings mode | D | • This mode enables changes in system status and timing adjustments. • Values can be entered directly. However, note that entered values are not checked for appropriateness, and that input of an incorrect value may result in abnormal operations. |