Riso GR3750
Users Mode
The Users Mode program enables a machine operator to select the initial operation settings of the machine. This mode is explained in "User Guide" and is intended for customers to make a selection if required.
NOTE:
The selections in boldface in the chart below are the standard initial settings (at factory shipment).
1. [Starting Up Users Mode]
Turn ON the power.
Press 8 key of the print quantity keys while pressing down the [*] key.
This makes access to the User mode.
2. [Making Selections]
After the access is made, select the item(s) whose initial setting is required to be changed. The first item which appears on the display is item No. 01.
If another item is desired, select it using the print quantity keys. When selecting item No.02, for example, press "0" and "2".
Now choose either of the two initial settings for the selected item. The selection is made by pressing the "START" button. The digit in the far right column of the display changes from "0" to "1" or "1" to "0". "0" and "1" appears alternately each time the "START" button is pressed.
Repeat this procedure until all required changes are made. To exit from this mode, press the "ALL RESET" button for 1 second. All new initial settings are memorized and the dispaly returns to normal operation.
Item Number |
Initial Setting Item | Enter "0" (factory setting) | Enter "1" | 4200 | 4900 | 5900 |
---|---|---|---|---|---|---|
01 | Print Speed | 100 sheets/min. | 60 sheets/min. | о | о | о |
02 | Auto Print Feature | OFF | ON | о | о | о |
03 | Jump Wing operation | Active | Inactive | × | о | о |
04 | Displayed Print Q'ty | 0 | 1 | о | о | о |
05 | Auto Image Area Limitation | Active | Inactive | × | о | о |
06 | Auto Reset Time | None | 5 minutes | о | о | о |
08 | Auto Idle Period | 12 hours | 6 hours | о | о | о |
09 | Bound Book Center mode | OFF | ON | × | × | о |
10 | Paper Feed Det. Sensor | Active | Inactive | о | о | о |
11 | Waiting time for the 2nd original when using 2UP | None | 15 seconds | × | × | о |