Riso FR3910
Test Mode. 7. Memory Switch 2
Various kinds of setting concerning master making, etc. are stored in Memory switches. Use <Print Position Adjust> key to change setting.
No. | DETAILS OF MEMORY SW |
---|---|
221 | Image Elongation/Shrinkage Correction (Write pulse motor) The set value is represented by an elongation/shrinkage amount of the image in the length of the B4 size. Memory SW 9 A B C D E F O Amount (mm) -7.0 -6.0 -5.0 -4.0 -3.0 -2.0 -1.0 0 1 2 3 4 5 6 7 8 +1.0 +2.0 +3.0 +4.0 +5.0 +6.0 +7.0 +8.0 |
222 | Paper Width Potentiometer Adjustment Set the A4 paper on the paper feed tray and adjust the paper side guide. Check the data display and set the Memory switch so that the data will be 210 mm. Memory SW 9 A B C D E F O Adjustment Value (mm) -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 +1 +2 +3 +4 +5 +6 +7 +8 |
223 | Separation Fan Air Flow Rate Control Memory SW 0 1 2 3 Power-on Time % 100% 70% 50% 30% * You can set either one of the Memory switches 0 through 3. |
224 | Master Removal Full Capacity Setting Memory SW 0 1 2 3 50 40 30 20 |
232 | Paper Feed Clutch OFF Delay Time Setting: (STANDARD) Memory SW 9 A B C D E F O Adjustment Value (mm) -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 +3 +6 +9 +12 +15 +18 +21 +24 |
234 | Paper Feed Clutch OFF Delay Time Setting: (CARD) Memory SW 9 A B C D E F O Adjustment Value (mm) -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 +3 +6 +9 +12 +15 +18 +21 +24 |
236 | Paper Feed Clutch OFF Delay Time Setting: (THIN) Memory SW 9 A B C D E F O Adjustment Value (mm) -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 +3 +6 +9 +12 +15 +18 +21 +24 |
238 | Paper Feed Clutch OFF Delay Time Setting: (CUSTOM) Memory SW 9 A B C D E F O Adjustment Value (mm) -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 +3 +6 +9 +12 +15 +18 +21 +24 |
240 | Paper Feed Clutch OFF Delay Time Setting with Special Paper Feed Unit Used: Memory SW 9 A B C D E F O Adjustment Value (mm) -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 +3 +6 +9 +12 +15 +18 +21 +24 |