PrintCopy.info service

Riso FR3910

Test Mode. 1. Operation Procedures

1 Starting Up Test mode

Turn on the power, pressing down both <M/P> and <LINE/PHOTO> buttons on the main panel.

2. HOW TO OPERATE

  1. Input a test mode No. by using panel-keys.
  2. Press <START> key to start operation.
  3. Press <START> key one more time to stop operation.
  4. To select another Test mode, clear the set Test No. by pressing the <C> or <STOP> button and select another Test No.

3. Exiting from the Test mode

To exit from a Test mode, clear the set Test No. by pressing the <C> or <STOP> button and then press the <ALL RESET> button.

4. HOW TO OPERATE TEST MODE NO’S 211 TO 261 (MEMORY SW’S)

  1. Starting Test mode, input a Test mode No. and press <START> key.
  2. To change the Memory switch setting, press the or key of the PRINT POSITION BUTTON to more the number up or down.
  3. To set the machine at the selected switch setting, press the <START> button and then <C> or <STOP> button and then <ALL RESET> button to exit from the Memory Switch adjustment.

5. Adjusting the Paper Width Potentiometer (Test No. 222)

Input a test mode No. by using panel-keys. If executed(press the START key), the Potentiometer Adjustment screen will be displayed on the LCD.

Put the A4 paper on the paper feed tray vertically and adjust the Memory switch so that the DETECTION DATA value will be 210 mm. To alter the MEMORY SW value, press the ◄ ► key. To settle the MEMORY SW value, press the START key.

6. Displaying the A/D Data (Test No. 114, 115, 116)

Input a test mode No. by using panel-keys. If executed(press the START key), the A/D Data Display screen will be displayed on the LCD. The A/D data is displayed in the HEX code.(00h to FFh)

7. Setting the Target Maintenance Master/Print Count Value (Test No. 150, 151)

Input a test mode No. by using panel-keys. If executed(press the START key), the Target Count Setting screen will be displayed on the LCD.

  • Use the panel-keys to set the master/print count. The lower two digits(master count) and lower three digits(print count) are fixed. Therefore, the maximum master count and print count are 999,900 and 9,999,000, respectively.
  • The count can be cleared by pressing the <C> key.
  • Pressing the <START> key or <STOP> key settles the displayed count and exits the Setting screen.

8. Checking/Clearing the Maintenance Master/Print Count Value (Test No. 93, 94)

Input a test mode No. by using panel-keys. If executed(press the START key), the then-current count value will be displayed on the LCD.

  • The count can be cleared by pressing the <C> key.
  • If you press <C> key to clear the count and press the <START> key, you will exit the Setting screen, clearing the counter value.

9. Displaying the Bottle Set Switch (Test No. 125)

Input a test mode No. by using panel-keys. If executed(press the START key), the status of the five Bottle Set switches will be displayed on the LCD.

  • The status displayed for each Bottle Set switch is 0: OFF and 1: ON.
  • The display is updated every time the status of the Bottle Set switch is altered.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us