Riso EZ200
Test Mode. 3. System & Control Panel Test Mode EZ5/EV5 3
| No | Data Setting |
|---|---|
| 0142 | Test Mode Display Language Selection |
| Display language selection. Setting: 0 : Normal 1 : Japanese 2 : English 3 : Chinese | |
| 0143 | Maintenance: Master Count Entry |
| Sets the number of master making at which the maintenance-call message is displayed. | |
| Range : 0 to 999,900 master making Unit : 1 = 100 master making Default : 0 : No maintenance call display |
|
| 0144 | Maintenance: Copy Count Entry |
| Sets the number of prints at which the maintenance-call message is displayed. | |
| Range : 0 to 9,999,000 printing Unit : 1 = 1000 printing Default : 0 : No display maintenance call display |
|
| 0145 | Maintenance: Drum Meter Entry |
| Sets the number of print-drum prints at which the maintenance-call message is displayed (for each print drum). | |
| Range : 0 to 9,999,000 printing Unit : 1 = 1000 printing Default : 0 : No display maintenance call display |
|
| 0146 | Scanning Priority in Master Making |
| To prevent machine movement vibration from affecting the scanning quality, the master removal and master making action takes after the scanning, if selected to ON. | |
| Setting: 0 : OFF <default> 1 : ON |
|
| 0150 | Print Quantity Display Recovery |
| Selection of print quantity display after print job is finished. Displays either [0] or [previous print quantity]. | |
| Setting: 0 : Displays 0 <default> 1 : Displays previous print quantity |
|
| 0151 | Print Speed After Short Interval |
| Gradual print speed acceleration after short intervals between printing job. | |
| Setting: 0 : Disabled <default> 1 : Enabled |
|
| 0152 | Light Print Display Control |
| Selects whether to display the [Light Print] button in the Functions Tab. | |
| Setting: 0 : Disabled <default> 1 : Enabled |
|
| 0153 | Special Paper Control Basic Display Control |
| Selects whether to display the Special Paper Control button in the Admin. Tab. | |
| Setting: 0 : Disabled <default> 1 : Enabled |
|
| 0154 | Minimum Print Quantity Control |
| Enables/Disables making input changes by the User Mode. | |
| Setting: 0 : Disabled 1 : Enabled <default> |
|
| 0155 | Counter Action Control |
| Enables/Disables copy counter & master counter (solenoid counter, software counter). This setting returns to default once the power is switched OFF. | |
| Setting: 0 : Counter Disabled 1 : Counter Enabled <default> |
|
| 0159 | Warning Errors Display |
| Selection to display or not to display the warning errors F02, F10 and F43. | |
| Setting: 0 : No display 1 : Displays <default> |
|
| 0160 | Auto Multi-Up Recovery |
| Selects if the Multi-up stays active or becomes inactive after one Multi-up operation. | |
| Setting: 0 : Change to inactive <default> 1 : Stays active |
|
| 0161 | Program Print Auto-Repeat Setting |
| Selection to keep the program printing active or to change to inactive after one master-making with Auto-Print OFF. | |
| Setting: 0 : Changes to inactive <default> 1 : Stays active |