Riso ComColor FW Series
Error Code Display. Type Code Z: Set Check Error
Definition
The interlocking SW is ON (detected) and the cover operable by the user is released
Releasing Conditions
Turn the interlocking SW OFF (release) or close the cover. Actions (to permanently resolve the error) can be taken by user operations.
Processing
- When an error occurs
If the unit is in operation, promptly stop operations while taking care not to trigger other failures. - Prior to releasing error
Operation modes that does not use the section where an error occurs are to be made available for execution. (Even during the occurrence of a set check error, it shall be possible to transition to the test mode and execute the test mode.)
- After error is released
Automatically restart the job that is stopped due to the occurrence of the error. (*)
* As exceptions, error types for which jobs do not automatically restart are to be listed in the [Remarks] in the chapter for each error type in the "Error Types Edition".