-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
Riso ComColor FW Series
Test Mode. 2. Numbering System
Definition of Words and Terms
Abbreviation |
Description |
BP |
Belt platen |
FD |
Face down |
FU |
Face up |
RA |
Remote agent |
SB |
Switchback |
STP |
Staple |
Names of transitions in test modes
Name |
Description |
Move |
To move from the normal mode to a test mode or vice versa. |
Start |
To start a test mode. To move to the operation screen of a test mode. |
End |
To end a test mode. To move to the standby screen of a test mode. |
Execute |
To execute processing (operation) of a test mode. |
Stop |
To stop processing (operation) of a test mode. |
Processing types
No. |
Processing Category |
Test Mode Execution Details |
0 |
Unavailable |
|
1 |
Sensor Monitoring (S) |
Whether the sensors and switches are on or off is monitored. A buzzer and text inform the sensor status at regular intervals. |
2 |
Drive Checking (D) |
The motor and other devices are turned on or off independently. The actuator is driven for a specified amount of time. (The driven time is specified for each test mode.) |
3 |
Unit Checking (U) |
A unit of operations is performed. |
4 |
Initialization (I) |
The values set in Data Edit are cleared (returned to the default values). The default values are normally factory setting values, but in some test modes, the values set in other test modes become the default values. |
5 |
Data Monitoring (M) |
Internal data of the system and values such as temperature and speed that cannot be indicated as OFF/ON are monitored. |
6 |
Data Editing (E) |
The setting values of the system are changed. Control parameters for image adjustment, paper transport, etc. can be changed and showing/hiding of the user function buttons can be selected.
Note: that wrong set values may affect the system operation, causing blurred printed images and low productivity. |
7 to 9 |
Not used |
|
Setting several values in Data Edit (E)
Several settings for the same area (mechanism, function, etc.) are contained in one test mode.