PrintCopy.info service

Riso ComColor 7010R

Error Code Display. 2. Error Types

Error types are a combination of a class code and subdivision code. Class codes are a single letter indicating the type of error: S, U, Z, X, Y, W, or I. Severity of errors ranges from "S" (most critical) to "I" (least critical), with some exceptions. Subdivision codes are two-digit numbers in the range 01–99 that further classify errors.

S Service Call Errors
Details A problem affecting the system as a whole has been detected, for which the fundamental solution cannot be implemented by users alone. (Problems in independent units, which do not affect the system as a whole, for which fundamental solutions are not possible are classified as service call errors.)
Solution Turn the printer OFF or follow instructions on the operation panel to clear the problem. However, a permanent solution will require repair by a service technician.
Notification Users are notified immediately, in all operating modes.
Operation No operating modes can be accessed until the error is cleared except test modes, which are accessible even during service call errors.
Resuming
Jobs
It is not possible to resume jobs interrupted by the error.
Other Mechanical operations are promptly stopped when these errors occur, to avoid causing other damage.

 

U Unit Errors
Details A problem affecting the system as a whole has been detected, for which the fundamental solution cannot be implemented by users alone. (Problems in independent units, which do not affect the system as a whole, for which fundamental solutions are not possible are classified as unit errors.)
Solution Turn the printer OFF or follow instructions on the operation panel to clear the problem. However, a permanent solution will require repair by a service technician.
Notification Users are notified immediately, in all operating modes.
Operation No operating modes can be accessed until the error is cleared except test modes, which are accessible even during unit errors.
Resuming
Jobs
It is not possible to resume jobs interrupted by the error.
Other Mechanical operations are promptly stopped when these errors occur, to avoid causing other damage.

 

Z Loading/Interlock Detection Error
Details A problem has been detected by the interlock system, or a cover has been opened that does not
interfere with operation.
Solution Users resolve these errors by restoring the interlock system to normal status or by closing the
cover that does not interfere with operation.
Notification Users are only notified in modes where there is a possibility that the relevant unit may be used. If users switch to a mode in which the unit is not used, notification is canceled. Note that even in modes where the unit is not used, error status can be checked by referring to error LEDs.
Operation Only operating modes that do not use the unit can be accessed until the error is cleared.
Resuming
Jobs
It is possible to resume jobs interrupted by the error.
Other Mechanical operations are promptly stopped when these errors occur, to avoid causing other
age.

 

X Jam Errors
Details A problem has occurred that prevents normal paper transfer.
Solution Users resolve these errors.
Notification Users are only notified in modes where there is a possibility that the relevant unit may be used. If users switch to a mode in which the unit is not used, notification is canceled. Note that even in modes where the unit is not used, error status can be checked by referring to error LEDs.
Operation Only operating modes that do not use the unit can be accessed until the error is cleared.
Resuming
Jobs
It is possible to resume jobs interrupted by the error.
Other Mechanical operations are promptly stopped when these errors occur, to avoid causing other damage.

 

Y Supply Errors
Details Consumables must be replaced or waste material must be removed.
Resuming
Jobs
It is possible to resume jobs interrupted by the error.
Other After the condition of the error occurs, normal operation is continued to the extent possible until a
convenient time to stop processing.

 

W Warnings
Details A problem has occurred that users must be warned about.
Solution Users respond to warnings, which can be cleared by users through panel operations.
Notification Users are only notified in modes where there is a possibility that the relevant unit may be used. If users switch to a mode in which the unit is not used, notification is canceled. Note that even in modes where the unit is not used, warning status can be checked by referring to error LEDs.
Operation After the condition of the warning occurs, normal operation is continued to the extent possible
until a convenient time to stop processing.
Resuming
Jobs
It is possible to resume jobs interrupted by the warning. (However, some warnings prevent jobs from being resumed.)

 

I Information
Details A situation has occurred that users must be informed about, such as the time for regular part
replacement.
Solution Users respond to the tip, which can be cleared by users through panel operations. However, a permanent solution will require service by a service technician.
Notification Users are only notified in modes where there is a possibility that the relevant unit may be used. If users switch to a mode in which the unit is not used, notification is canceled. Note that even in modes where the unit is not used, information status can be checked by referring to error LEDs.
Operation Conditions for information messages do not affect current processing.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Home
New Register Forgot Password?
Send message to us