Riso CZ180
Test Mode. List. 4. Paper-feed and Paper-ejection Test Modes 2
No. | Data setting | |
---|---|---|
0741 | Paper-feed-clutch ON angle | |
Description | Adjusts the drum angle timing for activating the paper-feed clutch. | |
Setting | Range : -200 to +200 (-20.0° to +20.0°) (+ values delay clutch ON timing ) Unit : 5 (0.5°) Default : 0 (0°) |
|
0742 | Paper-feed-clutch OFF angle | |
Description | Adjusts the drum angle timing for deactivating the paper-feed clutch. | |
Setting | Range : -200 to +200 (-20.0° to +20.0°) (+ values delay clutch OFF timing ) Unit : 5 (0.5°) Default : 0 (0°) |
|
0743 | Paper feed retries after one paper feed action on 1st paper feed area. | |
Description | Sets the number of times the 1st paper feeding is tried when no paper feed occurs. | |
Setting | Range : 1 to 3 1: No paper feed retry action. (default) The machine displays paper feed jam on the first paper feed try. 2: One more paper feed action. Paper jam display if no paper feeds after second paper feed try. 3: Two more tries. Paper jam display if no paper feed after third paper feed try. |
|
0751 | Paper feed jam detection angle. (Paper feed jam at Paper sensor) | |
Description | Adjusts the drum angle timing for detecting the paper feed jam by paper sensor. (Paper IN) | |
Setting | Range : -200 to +200 (-20.0° to +20.0°) Unit : 5 (0.5°) Default : 0 (0°) (+ values delay detection timing ) |
|
0753 | Paper ejection jam detection angle (1). | |
Description | Adjusts the drum angle timing for the Paper ejection sensor to check the paper to come. | |
Setting | Range : -500 to +500 (-50.0° to +50.0°) Unit : 5 (0.5°) Default : 0 (0°) (+ values delay detection timing ) |
|
0754 | Paper receiving jam detection angle (2). | |
Description | Adjusts the drum angle timing for the Paper ejection sensor to check the paper to go out. | |
Setting | Range : -500 to +500 (-50.0° to +50.0°) Unit : 5 (0.5°) Default : 0 (0°) (+ values delay detection timing ) |
|
0755 | Paper-ejection motor speed adjustment (Proof-Print) | |
Description | Speed ratio between the suction belt and drum. | |
Setting | 0 : 1.59 times the drum speed. 1 : 2.19 times the drum speed. 2 : 2.39 times the drum speed. 3 : 2.79 times the drum speed. (default) 4: 3.18 times the drum speed. |
|
0756 | Paper-ejection motor speed adjustment (Print speed No.1) | |
Description | Speed ratio between the suction belt and drum. | |
Setting | 0 : 1.04 times the drum speed. 1 : 1.09 times the drum speed. 2 : 1.19 times the drum speed. 3 : 1.39 times the drum speed. (default) 4: 1.59 times the drum speed. |
|
0757 | Paper-ejection motor speed adjustment (Print speed No.2) | |
Description | Speed ratio between the suction belt and drum. | |
Setting | 0 : 1.05 times the drum speed. 1 : 1.09 times the drum speed. 2 : 1.19 times the drum speed. (default) 3 : 1.39 times the drum speed. 4: 1.59 times the drum speed. |
|
0758 | Paper-ejection motor speed adjustment (Print speed No.3) | |
Description | Speed ratio between the suction belt and drum. | |
Setting | 0 : 1.03 times the drum speed. 1 : 1.06 times the drum speed. 2 : 1.19 times the drum speed. (default) 3 : 1.32 times the drum speed. 4: 1.46 times the drum speed. |
|
0759 | Paper-ejection motor speed adjustment (Print speed No.4) | |
Description | Speed ratio between the suction belt and drum. | |
Setting | 0 : 1.02 times the drum speed. 1 : 1.05 times the drum speed. 2 : 1.10 times the drum speed. 3 : 1.19 times the drum speed. 4: 1.30 times the drum speed. |
|
0760 | Paper-ejection motor speed adjustment (Print speed No.5) | |
Description | Speed ratio between the suction belt and drum. | |
Setting | 0 : 1.01 times the drum speed. 1 : 1.05 times the drum speed. 2 : 1.10 times the drum speed. (default) 3 : 1.19 times the drum speed. 4: 1.29 times the drum speed. |
|
0776 | Elevator motor overcurrent detection ON/OFF selection | |
Description | ON or OFF of the Elevator motor overcurrent detection. | |
Setting | Range : 0 or 1 0: OFF - No detection 1: ON - Detection (default) |