Riso CZ180
Test Mode. List. 4. Paper-feed and Paper-ejection Test Modes 1
No. | Sensors, switches | Detection status |
---|---|---|
0600 | Paper detection sensor | Sensor light reflected (paper detected) |
0602 | Elevator upper-limit sensor A | Sensor light blocked (Sensor detecting paper feed tray at maximum up position) |
0604 | Elevator lower-limit sensor | Sensor light blocked (Sensor detecting paper feed tray at maximum down position) |
0605 | Paper sensor | Sensor light blocked (paper detected) |
0606 | Paper-ejection sensor | Sensor light blocked (paper detected) |
0612 | Paper-ejection FG sensor | Sensor light blocked (detecting encoder disc) |
No. | Motor solenoid system | Remarks |
---|---|---|
0660 | Paper ejection motor | Rotates the motor. |
0661 | Suction fan | Activates the fan. |
0662 | Separation fan | Activates the fan. |
No. | Unit check |
---|---|
0681 | Paper feed tray maximum up positioning Raises the paper feed tray to the maximum up position by pressing START key. |
0682 | Paper feed tray elevation up & down Raises and lowers the paper-feed tray repeatedly until STOP button is pressed. |
0683 | Paper feed tray maximum down positioning Lowers the paper feed tray to the maximum down position by pressing by pressing START key. |
0688 | Paper-feed clutch ON/OFF action Presses START key to turn ON the clutch. The clutch automatically switches off after 10 seconds. |
0705 | Paper sensor sensitivity automatic adjustment Automatically adjusts the paper sensor sensitivity by activating the test mode with one clean sheet of white paper of which the operator normally uses. |
0708 | Elevator motor ON action Rotates the elevator motor for 10 seconds. [This test mode is for checking the motor as one independent part. Disconnect the motor from the cutter unit before activation.] |
No. | Data check | Details |
---|---|---|
0722 | Paper sensor | Displays the A/D value of the paper sensor. |