Riso CZ180
Test Mode. List. 2. Imaging & Scanning Test Modes 1
No. | Sensor switch check | Detection status |
---|---|---|
0201 | Original Det. Sensor | Detecting (original present) |
0210 | Original IN Sensor | Detecting (original present) |
0211 | AF Cover Set Sensor | Detecting (AF cover closed) |
No. | Motor, solenoid | Remarks |
---|---|---|
0260 | AF Scanner lamp | Switches ON/OFF scanner lamp |
0261 | AF Read Pulse Motor (CW) | Rotates the motor in clockwise (normal) direction |
0262 | AF Read Pulse Motor (CCW) | Rotates the motor in counter-clockwise (reverse) direction |
0263 | AF Stipper Solenoid | Switches ON/OFF the solenoid |
No. | Unit check |
---|---|
0284 | AF Cycle Continuous Action Repeats the AF original feed action until the original runs out from the AF original feed tray. |
No. | Data setting | |
---|---|---|
0340 | Line-Copy Slice Level Adjustment | |
Description | Sets the slice level for line mode. | |
Setting | Range : - 8 to + 8 (Larger valudes for lighter print.) Unit : 1 Default : 0 |
|
0341 | Auto Base Control (ABC) Slice Level Adjustment | |
Description | Sets the slice level for ABC. | |
Setting | Range : - 8 to + 8 (Larger valudes for lighter print.) Unit : 1 Default : 0 |
|
0342 | Shading Compensation Averaging | |
Description | This test mode setting becomes effective for master-making in Line Mode, Auto Scanning Density and Reduced Reproduction Size. The purpose of this test mode is to prevent thin lines from disappearing when the reproduction size is reduced. Range : - 8 to + 8 (Larger valudes for lighter print.) Unit : 1 Default : -5 |
|
0350 | Halftone Curve Selection (Photo) | |
Description | Selects the matrix forming the halftone-curve base for photo mode. | |
Setting | Range: 0 to 8 Unit : 1 Default : 4 |
|
0352 | Halftone Curve Selection (Duo) | |
Description | Selects the matrix forming the halftone-curve base for DotDuo mode. | |
Setting | Range : 0 to 8 Unit : 1 Default : 4 |
|
0364 | Edge Emphasis Threshold Offset for Line-Mode printing (for master-making density setting 1 to 2) | |
Description | Selects the matrix forming the halftone-curve base | |
Setting | Range : 0 to 7 Unit : 1 Default : 1 |
|
0365 | Edge Emphasis Threshold Offset for Line-Mode printing (for master-making density setting 3 to 5) | |
Description | Selects the matrix forming the halftone-curve base | |
Setting | Range : 0 to 7 Unit : 1 Default : 3 |