Riso CZ180
Test Mode. List. 1 System & Panel Test Modes 2
| No. | Data clear | Details |
|---|---|---|
| 0110 | Clearing Jam Status Data | |
| Forcibly clears the jam. | This test mode can be used to temporary clear error display. For acutal correction of the problem, the cause for the display should be corrected. Consumables error displays cannot be cleared. |
|
| 0111 | Clearing User Memory | |
| User area memory clear | Initializes data in user area memory to the programming defaults Record all the settings before the test mode activation. |
|
| 0112 | Clearing Normal Area Test-Mode Data Memory [MACHINE] | |
| Normal area test mode memory clear for test modes on the machine. | Initializes all normal area test mode settings on the machine EEPROM to their programming default values. The initializing is effective after rebooting the machine. The protected area test modes stay unchanged. Record all the settings before the test mode activation. |
|
| 0113 | Maintenance Count Clear (master making) | |
| Maintenance Call master count clear | Clears the master-making maintenance-call message. | |
| 0114 | Maintenance Count Clear (printing) | |
| Maintenance Call copy count clear | Clears the printing maintenance-call message. | |
| No. | Data check | Details |
|---|---|---|
| 0124 | Machine Serial Number 1 | Displays the left 4 digits of the machine serial number. |
| 0125 | Machine Serial Number 2 | Displays the left 4 digits of the machine serial number. |
| 0128 | Job Separator connection status | Displays whether there is any Job Separator connection. 0: not connected 1: connected |
| 0129 | NIC connection status | Displays whether there is any NIC connection. 0: not connected 1: connected |
| 0130 | MCTL PCB program version display | Displays Mechanical control PCB program version. Example: Displays "0101" for Ver.1.01 |
| 0131 | System program version display | Displays ROSA program version. Example: Displays "0101" for Ver.1.01 |
| 0137 | Maintenance Call master-making quantity display (total quantity at present.) | Displays the present master-making quantity done from the time the Maintenance Call setting is initialized. |
| 0138 | Maintenance Call print quantity display (total quantity at present.) | Displays the present print quantity done from the time the Maintenance Call setting is initialized. |
| No. | Data setting | |
|---|---|---|
| 0143 | Maintenance - Master Count Entry | |
| Description | Selects the maintenance call count for master-making. | |
| Setting | Range: 0 to 9999 (0 to 999,900 master-making) Unit: 1 (100 master-making) Default: 0 (No Entry) |
|
| 0144 | Maintenance - Copy Count Entry | |
| Description | Selects the maintenance call count for printing. | |
| Setting | Range: 0 to 9999 (0 to 9,999,000 copies) Unit: 1 (1,000 copies) Default: 0 (No Entry) |
|
| 0147 | Print Quantity Selection (ref: Test Mode No.0090) | |
| Description | Selects the print quantity for the continuous master-making & printing operation by Test Mode No. 0090. | |
| Setting | Selectable range : 1 to 100 (1 to 100 prints) Default : 3 (3 prints) |
|
| 0148 | Master-Making Type Selection (ref: Test Mode No.0090) | |
| Description | Selects the type of image for the continuous master-making & printing operation by Test Mode No. 0090. | |
| Setting | Selectable range : 0 to 6 0 : Image by Test Mode No.0080. 1 : Image by Test Mode No.0081. 2 : Image by Test Mode No.0082. 3 : Image by Test Mode No.0083. 4 : Image by Test Mode No.0084. 5 : Image by Test Mode No.0085. (For now is No.0081) 6 : Image by Test Mode No.0086. (For now is No.0081) Default : 1 (Image by Test Mode No.0081) |
|
| 0155 | Counter Action Control | |
| Description | Stops both the mechanical & soft counter. Once the power is turn OFF and turned back ON, the setting automatically changes back to Counter Active. | |
| Setting | 0: Stops the counter 1: Activates the counter (default) |
|
| 0161 | Program Print Auto-Repeat Setting | |
| Description | Selection to keep the program printing active or to change to inactive after one master-making with Auto-Print OFF. | |
| Setting | 0 : Stays active (default) 1 : Change to inactive |
|