Riso CV1860
Test Mode. List. 4. Paper-feed and Paper-ejection Test Modes 1
| No. | Sensors, switches | Detection status |
|---|---|---|
| 0600 | Paper detection sensor | Sensor light reflected (paper detected) |
| 0602 | Elevator upper-limit sensor A | Sensor light blocked (Sensor detecting paper feed tray at maximum up position) |
| 0604 | Elevator lower-limit sensor | Sensor light blocked (Sensor detecting paper feed tray at maximum down position) |
| 0605 | Paper sensor | Sensor light blocked (paper detected) |
| 0606 | Paper-ejection sensor | Sensor light blocked (paper detected) |
| 0612 | Paper-ejection FG sensor | Sensor light blocked (detecting encoder disc) |
| No. | Motor solenoid system | Remarks |
|---|---|---|
| 0660 | Paper ejection motor | Rotates the motor. |
| 0661 | Suction fan | Activates the fan. |
| 0662 | Separation fan | Activates the fan. |
| No. | Unit check |
|---|---|
| 0681 | Paper feed tray maximum up positioning Raises the paper feed tray to the maximum up position by pressing START key. |
| 0682 | Paper feed tray elevation up & down Raises and lowers the paper-feed tray repeatedly until STOP button is pressed. |
| 0683 | Paper feed tray maximum down positioning Lowers the paper feed tray to the maximum down position by pressing by pressing START key. |
| 0688 | Paper-feed clutch ON/OFF action Presses START key to turn ON the clutch. The clutch automatically switches off after 10 seconds. |
| 0705 | Paper sensor sensitivity automatic adjustment Automatically adjusts the paper sensor sensitivity by activating the test mode with one clean sheet of white paper of which the operator normally uses. |
| 0708 | Elevator motor ON action Rotates the elevator motor for 10 seconds. [This test mode is for checking the motor as one independent part. Disconnect the motor from the cutter unit before activation.] |
| No. | Data check | Details |
|---|---|---|
| 0722 | Paper sensor | Displays the A/D value of the paper sensor. |